546533
20
Zoom out
Zoom in
Previous page
1/21
Next page
20
Troubleshooting
Trouble Probable Cause Suggested Remedy
Fan will not start 1. Fuse or circuit breaker blown.
2. Loose power line connections to the
fan, or loose switch wire connections
in the switch housing.
1. Check main and branch circuit fuses or circuit
breakers.
2. Check line wire connections to fan and switch
wire connections in switch housing.
CAUTION : Make sure main power is turned off.
Fan sounds noisy 1. Loose screws in motor housing.
2. Screws securing fan blade
flanges to motor hub are loose.
3. Wire nuts inside switch housing
rattling.
4. Light kit glassware loose ; light
bulb loose in socket.
5. Motor noise caused by solid-
slate variable speed control.
1. Check to make sure all screws in motor housing
are snug (not over-tight)
2. Check to make sure the screws which attach the
fan blade flanges to the motor hub are tight.
3. Check to make sure wire nut connectors in
switch housing are not rattling against each
other or against the interior wall of the switch
housing.
CAUTION : Make sure main power is turned off before
entering switch housing.
4. If using an optional Ceiling Fan Light Kit. Check
to be sure the screws securing the glassware
are finger tight. Check to be sure light bulb is
tight in socket.
5. Some fan motors are sensitive to signals from
Solid-State variable speed controls. If Solid-
State Control is used and motor noise results
choose an alternate control method.
Fan wobbles or
shakes excessively.
1. Screws securing fan blade
flanges to blade hub are loose.
2. Fan blade flanges not sealed
properly.
3. Fan blades out of balance.
1. Check to be sure screws which attach the fan
blade flanges to the motor hub are tight.
2. Check to be sure the fan blade flanges seat
firmly and cleanly to the top surface of the motor
hub.
3. Interchanging adjacent (side-by-side) blade
pairs can redistribute the weight and result in
smoother operation.
Technical information
Type: DC30T
Output: 52 W
Power supply: 230 V ~50 Hz
The Environment
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin; hand it in
at a collection point for the reuse of electrical and electronic equipment. Please refer to the symbols on the
product, the user’s instructions or the packaging. The materials can be re-used as indicated. Your help in
the re-use, recycling or other means of making use of old electrical equipment will make an important
contribution to the protection of the environment. Contact your municipality for the address of the
appropriate collection point in your neighbourhood.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DC30T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DC30T in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info