546798
17
Zoom out
Zoom in
Previous page
1/20
Next page
Users instructions
17
English
OPERATION - Seal bags
A roll of seal bags is included in your new bag sealer. This instruction manual describes the sealing steps
for seals bags, which are sealed on one side only. Please note that not all seals bags are suitable for using
with a bag sealer.
OPERATION - Using the Bag Sealer
The appliance is ready to use as soon as the plug is plugged into a wall socket.
1. Open the lid and pull a piece of foil (slightly lager than required) out of the equipment. Use no more than
29 centimetres foil at a time, otherwise you cannot seal the last seam.
When using a new roll of seal bags for the first time, first pull a piece of approx. 2 cm foil out, and then
perform steps 1 and 2 to seal the front of the roll.
2. Now close the lid and push down evenly with two hands on both sides. The green indicator light will
illuminate. Hold the lid down until the light extinguishes. The bag is now securely sealed and separated
from the roll of seals bags inside the appliance.
3. Now fill the bag through the open unwelded side, taking care that the seams area remains free, so that
the welding process is not interfered with the substance being filled into the bag. When filling the bag
with liquids, only fill half of the bag. Make sure the appliance does not absorb any liquids.
4. Smooth the open side of the bag, open the lid again and place the foil over the sealing wire into the
appliance. Repeat the welding process as previously described. After the green indicator light has
extinguished, that side of the bag will also be securely sealed and excess foil can be easily removed.
OPERATION - Air pump function
This device is fitted with an air pump to remove surplus air from the foil bag. After this you can easily seal
the bag.
1. Place the open side of the seal bag in the sealer, so that the air pump is inside the seal bag.
2. Suction starts as soon as you lightly press the centre of the lid. Only the red lamp will light up.
3. As soon as sufficient air has been sucked out, use both hands to press both sides of the lid. Suction
stops, the green control lamp lights up and sealing commences.
4. Check whether the bag is sealed properly. If not, repeat the sealing.
5. After use remove the plug from the wall socket.
Between each sealing application wait at least 1.5 minutes.
CLEANING & MAINTENANCE
1. Before cleaning your bag sealer, always make sure that the plug has been remove from the mains supply
socket.
2. Wipe the outside housing of the bag sealer with a damp cloth. For safety reasons, the appliance should
not be immersed into liquids.
3. Do not us harsh or abrasive cleaners.
THE ENVIRONMENT
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user’s instructions or the packaging.
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DBS827 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DBS827 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info