546814
22
Zoom out
Zoom in
Previous page
1/40
Next page
Users instructions
22
English
OPERATION - General
The appliance is intended only for domestic use,
not for professional use.
The following elements should be present in the
package, necessary for the correct assembly of the
device.
1. Base
2. Service plate
3. Panel with heating element
4. Grill
5. Fat collector
6. Bottom legs with caps (4 pieces)
7. Top legs (4 pieces)
8. Screws and wingnuts (4 pieces)
9. Windshield
OPERATION - Mounting
First assemble the legs and place the base on the legs.
First assemble the frame, then assemble the base to the frame.
The frame consists of a small table (2) and four legs. Each leg consists of 2 parts, a top leg (6) and a bottom
leg (7). These parts are assembled by means of a screw and wing nut (8) to the table.
1. Insert a top leg in one of the table holes.
2. Insert a bottom leg into the same table hole.
3. Make sure the holes of the legs and the table match.
4. Insert one of the screws from the inside through the hole and tighten it with the wing nut on the outside.
Tighten securely.
5. Repeat this for each leg to complete the frame (figure 2).
6. Place the complete frame on a solid surface.
7. Now place the base (1) on the frame. Make sure that each leg fits into one of the four holes situated in
the bottom of the base. Press the base firmly so that the legs are fixed in the base.
8. Place the grease collector (5) in the base.
9. Place the control panel with heating element (3) by sliding it into the recess in the front of the base. Fit
the element sides in the 2 holes in the base.
ATTENTION: When the panel with heating
element (3) is not placed correctly, it will not
function (figure 3). It will prohibit the switch
from connecting to the base.
10. Place the grill.
11. Place the windshield by putting the pins in the
recesses.
8
1
2
7
6
9
3
4
5
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron AJA902S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron AJA902S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info