546844
16
Zoom out
Zoom in
Previous page
1/20
Next page
Instruction manual
16
English
OPERATION - General
The appliance is intended only for domestic use,
not for professional use.
1. Shaving head
2. Epilating head cover
3. Shaving head cover
4. On/Off slide (O=Off, 1=Normal speed,
2=High speed)
5. Re-charging indicator light
6. Connector socket
7. Epilating discs
8. Epilating head
9. Release
10. Connector
11. Mains adapter
12. Cleaning brush
Figure 1
OPERATION - First time use/charging
1. Make sure the on/off switch is in the 0 (off) position.
2. Insert the adapter plug into the socket at the bottom of the appliance.
3. Insert the adapter connector plug into the mains socket. The re-charging indicator light should come on.
4. Leave the device to charge for at least 8 hours.
5. Remove the adapter plug from the mains socket.
6. Remove the plug from the appliance. It is now ready for use.
OPERATION - Preparing for use
Make sure your skin is clean, entirely dry and free from grease. Do not use any cream before you start epilating.
Epilation is easier just after taking a bath or shower. Make sure your skin is completely dry when you
start epilating.
When you use the appliance for the first time, we advise you to try it out on an area with only light hair
growth to get accustomed to the epilation process.
As the hairs are removed by the root, epilation may cause some skin discomfort the first few times you
use the epilator. This effect will gradually diminish when you use the appliance more often. Regrowth
tends to be softer both in appearance and to the touch.
Tip: After epilation, you can apply a mild cream or lotion to help reduce possible
skin irritation. It will make your skin feel smoother and will give you a fresh
sensation. Do not use lotions that contain alcohol.
Use the shaving head first with long hairs. See ‘Cleaning and maintenance’ for
removal of the epilating head.
Figure 2 Exchanging the epilating head
OPERATION - Epilating
1. Connect the appliance to the mains plug
by inserting the connector into the bottom
of the appliance.
2. Insert the mains plug into the power socket.
3. Switch the appliance on by selecting the
desired speed. Select speed ‘1’ for areas
with little hair growth, for hard-to reach
areas and for areas where bones are
located directly beneath the skin, such
as knees and ankles. Select speed ‘2’ for
larger areas with stronger hair growth.
Figure 3a and 3b
Placement of application onto the skin
123
4
5
6
7
8
9
10 11
12
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron AC930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron AC930 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info