546555

Bestron A2010E Manual

32
Zoom out
Zoom in
Previous page
1/36
Next page
User’s instructions
32
English
Cleaning and maintenance
Cleaning
1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure
no moisture gets into the appliance.
2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing
the wheels from turning easily. Consequently they should be kept clean.
PLEASE NOTE
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
Changing the dust bag
Change the dust bag immediately once the ‘dust bag full’ indicator turns red, see Figure 11.
PLEASE NOTE
It is possible that the indicator turns red whilst the dust bag is not yet full. If so, then the nozzle, hose or
tubes may be blocked. These will then need to be unblocked.
1. Open the cover by pulling
the cover release (dust bag)
upwards. Remove the dust bag
holder from the vacuum cleaner.
Remove the dust bag from the
holder, and dispose of it in a
dustbin.
2. Fit a new dust bag in the
holder with the arrow pointing
downwards, and press into
position. Place the dust bag
holder back.
3. Press the cover until it clicks into
place.
PLEASE NOTE
• Make sure that the dust bag
does not become pinched by the
cover. This could damage the
appliance and/or the dust bag.
Figure 11 Changing the dust bag
Note Dust bags for this vacuum cleaner are available from every major hardware store, with a
statement of the type number Bestron D00013/D0013S.
Cleaning or replacing the motor safety filter
Clean or replace the motor safety filter at least twice a year, and
more frequently if the filter is visibly blocked.
1. Remove the plug from the wall socket.
2. Remove the hose from the vacuum cleaner.
3. Open the cover by pulling the cover release (dust bag)
upwards.
4. Remove the dust bag, see Figure 11.
5. Remove the motor safety filter from the vacuum cleaner, see
Figure 12.
6. Dispose of the filter, or wash it in lukewarm water. Allow it to dry
thoroughly.
7. Return the cleaned or new filter to its holder, and return the
holder to the vacuum cleaner.
8. Fit the dust receptacle back into the holder. Press the cover
until it clicks into place.
Figure 12 Removing the motor safety filter
… 32 …


Need help? Post your question in this forum.

Forumrules
1

Forum

bestron-a2010e

Reset search

  • Hi, Could anyone please suggest about how to Access the Motor and Cord Retract in Bestron A2010E vacuum cleaner.
    Thanks
    San Submitted on 7-5-2017 at 15:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron A2010E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron A2010E in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info