Manual BeSafe Pregnant iZi fix (page 2 of 52) (All languages)

768219

Zoom out

Zoom in

1/52

6 7

! Vital information

• DO NOT switch o the airbag or any other safety system of the

particulair vehicle seat where the BeSafe Pregnant is used.

• Use the BeSafe Pregnant only in combination with a 3-point

car belt.

• Use the BeSafe Pregnant from 2 months of pregnancy.

• After an accident, the BeSafe Pregnant must be replaced. Although

it may look undamaged, the BeSafe Pregnant may not be able to

protect mother and unborn child as well as it should in another

accident.

• Before every use, make sure that the 3-point belt is not damaged or

twisted and installed tight.

• DO NOT attempt to dismantle, modify or add any part to the seat.

Warranty will expire if non-original parts or accessories are used.

• KEEP this user manual for later use with the seat.

• The BeSafe Pregnant iZi FIX is for Pregnant women to help position

the lap belt of the 3-point car belt correctly.

Thank you for choosing BeSafe Pregnant iZi FIX

• Shoulder belt

• Lap belt

• Strap

• Strap buckle

• Strap ring (2x)

• FIX connectors (2x)

• Crotch strap

• Lap belt connector

• Isoﬁx car anchorage (2x)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Preparing to install

Pregnant belt installation in seat with isoﬁx anchorages

Pregnant belt installation in seat without isoﬁx anchorages

1. In seats with isoﬁx anchorages the Besafe Pregnant can be installed

with the ﬁx connectors.

2. Remove the strap from the pregnant belt.

3. Connect both ﬁx connectors with the isoﬁx anchorages of the vehicle

seat. (10)

4. Click! (10)

1. In seats without isoﬁx anchorages BeSafe Pregnant can be installed

with the strap.

2. Put the strap around the back of the vehicle seat and close the

buckle. (11)

3. Click! (12)

4. Pull the strap through the buckle until it is tight. (13)

5. When the vehicle seats do not have isoﬁx anchorage or no possibility

to put the strap around the seat, BeSafe Pregnant can not be used in

this partculair vehicle seat position.

Using BeSafe Pregnant

Cleaning instructions

1. After installing the BeSafe Pregnant in the vehicle seat, it is ready for

use.

2. Sit on top of the pregnant belt and install the 3-point car belt in the

usual way. (14)

3. Pull the ﬂap of the lap belt connector up between your legs and

position the ﬂap behind the lap belt. (15)

4. Close the ﬂap of the lap belt connector over the lap belt by closing

both poppers. (15)

5. Make sure there is no slack in the 3-point car belt.

6. Make sure that the lap belt is positioned low across the hips.

7. Use the BeSafe Pregnant only in combination with a 3-point car belt.

1. The pregnant belt must be washed according to the instructions on

the product.

2. DO NOT use any aggressive cleaning agents; these may harm the

construction material.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe Pregnant iZi fix in the language / languages: All languages as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BeSafe Pregnant iZi fix Manual

Product: