768212

BeSafe IZI Twist i-size Manual

3
Zoom out
Zoom in
Previous page
1/102
Next page
10 11
• Adjustable headrest
• Shoulder straps
• Seat cushion
• Harness buckle
• Side support
• Central adjuster
• Reclining handle
• Release handle headrest
• Spirit level
• Floor support
• Floor support height indicator
• Height adjuster floor support
• Rotation release handle
• Switch for ISOfix connectors (2x)
• ISOfix connectors (2x)
• ISOfix release switch
• ISOfix indicators (2x)
• ISOfix car anchorage (2x)
(1a)
(1b)
(1c)
(1d)
(1e)
(1f)
(1g)
(1h)
(1i)
(1j)
(1k)
(1l)
(1m)
(1n)
(1o)
(1p)
(1q)
(1r)
Preparing to install
Installation
1. When installing in the back seat of the vehicle, push the front seat of
the vehicle forward as far as possible and adjust the back rest into
an upright position (if it can be adjusted).
2. When installing in the front seat of the vehicle, adjust the back rest
into an upright position.
3. Position the vehicle on a horizontal surface when installing the seat.
4. When the base is lifted the floor support should fall downwards from
underneath the base. Do this outside the car.
5. Push down the switch for the ISOfix connectors at both sides to
release the ISOfix connectors. (2)
6. Position the base on the vehicle seat. Click the ISOfix connectors on
to the ISOfix anchorages on the vehicle seat. Make sure that both
ISOfix indicators are green. (3)
7. Push the seat towards the backrest of the vehicle seat until it
touches the backrest. (4)
8. The ISOfix connectors willhave resistance sliding in, in the most
outward positions, before they are connected with the ISOfix
anchorage of the vehicle.
9. Tip: once the ISOfix connectors are installed, the seat can be
Twisted towards the door of the vehicle to get a better view on the
installation display.
10. Remove the yellow cap from the floor support. Adjust the floor
support, so it is in contact with the floor of the vehicle. (5)
11. The height indicator of the floor support shows green when the floor
support is in contact with the floor. (5)
12. Lift the base at the front side (near the spirit level) and extend
the floor support till the spirit level is in the middle, indicating a
horizontal position of the base. (5)
13. Tip: place one foot onto the bottom end of the floor support while
lifting the base to make adjusting the length at this step easier.
14. The alarm sound stops when the floor support indicators show green
and it is in contact with the floor and when the horizontal spirit level
shows a horizontal position of the seat. (5)
15. When having the child seat installed rear facing in the back, it is
recommended to position the front vehicle seat in a way that it is
close to the touchpoint with the child seat. Make sure that the child
seat can still rotate freely.
When having the child seat installed rear facing on the passenger
seat in the front, it is recommended to position the passenger seat
in a way that the dashboard is close to the touchpoint with the child
seat. Make sure that the child seat can still rotate freely.
16. The seat is delivered with removable SIP+ (side impact protection
+). This extra side impact protection should be used on the door side
of the vehicle. It can be connected by slotting between the seat shell
and the fabric. The seat already oers high level integrated side
impact protection. This extra side impact protection improves the
protection in the side impact still further. (Not on all models) (6)
17. Tip: For an optimal height of the SIP+, position it between the two
raised dots on the side of the seat shell.
18. Do not use the SIP+ on the seat when the space between seat and
door of the vehicle is too small, which might lead to a situation where
the seat is not positioned correctly on the vehicle seat. (6)
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeSafe IZI Twist i-size at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe IZI Twist i-size in the language / languages: All languages as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info