768214
3
Zoom out
Zoom in
Previous page
1/101
Next page
10 11
Adjustable headrest
Shoulderbelt lock
Shoulderbelt guide
Lapbelt guider
Reclining handles (2x)
Base
ISOfix release handle
SIP bumper
Height adjustment handles (2x)
ISOfix connectors (2x)
ISOfix release buttons (2x)
ISOfix indicators (2x)
ISOfix vehicle anchorage (2x)
PAD+
(1a)
(1b)
(1c)
(1d)
(1e)
(1f)
(1g)
(1h)
(1i)
(1j)
(1k)
(1l)
(1m)
(1n)
Preparing to install
Installation
1. When installing the seat in the front vehicle seat make sure the
backrest of the vehicle seat is in an upright position.
2. Position the seat inside the vehicle.
3. Pull the ISOfix release handle to release the ISOfix connectors. A
button on top of the handle will keep the handle in the released
position and locks the ISOfix connectors to slide in the base again.
(2) The ISOfix arms lock only in the position where it is totally
extended. In this locked position 2 red marks next to the button on
the handle will become visible. (3)
4. Click the ISOfix connectors to the ISOfix anchorage points in the
vehicle seat (4). Make sure that all ISOfix indicators are GREEN. (5, 6)
5. Press the button on top of the ISOfix release handle (located
between the red marks) down and push the handle back into the
base. (7, 8) Push the seat as far as possible towards the backrest of
the vehicle seat. (9)
6. Make sure the back of the seat is touching the backrest of the vehicle
seat. If the headrest of the vehicle is pushing the seat away from the
backrest, adjust the headrest.
7. If the seat cannot be used in combination with ISOfix anchorage
points in the vehicle seat, the ISOfix connectors can be stowed inside
the seat and the seat can be used in combination with the 3-point
belt only.
8. Slide the shoulderbelt in the shoulderbelt guide. (10) Make sure the
belt is not twisted and that the shoulderbelt guide is closed again to
keep the belt inside. (11)
9. The seat is delivered with removable SIP+ (side impact protection
+). This extra side impact protection should be used on the door
side of the vehicle. It can be connected on the outside of the side
bumper in 2 slots. The seat already oers high level integrated side
impact protection. This extra side impact protection improves the
protection in a side impact still further. (12)
10. Do not use the SIP+ on the seat when the space between seat and
door of the vehicle is too small, which might lead to a situation
where the seat is not positioned correctly on the vehicle seat.
1. Adjust the headrest to the correct height by turning the height
adjuster handle. (13) Make sure that the shoulder belt is level with
your child’s shoulder. (14)
2. The seat can be positioned in 2 positions by pulling the reclining
handle upwards and pushing the seat forwards or backwards. Position
the seat in the correct position before positioning the child with the
vehicle belt. (15)
3. Position the vehicle belt in front of the child and lock the belt into the
buckle of the vehicle. (16, 17)
4. BeSafe recommends to use the lapbelt guider to keep the child
seated in the optimum upright position. To use the lapbelt guider
position the lapbelt through the lapbelt guider.
5. The PAD+ must be used around the shoulder vehicle belt and
positioned between the chin and the chest of the child.
6. Remove slack in the belt by pulling the belt towards the retractor. (18)
Positioning of the child
Removing the seat
1. Remove the shoulderbelt out of the shoulderbelt guide by pushing
the shoulderbelt lock in the guider up and slide the belt out. (19, 20)
2. Pull the ISOfix release handle to release the ISOfix connectors. (21)
In this way the base of the seat can move forwards and the ISOfix
release buttons can be operated. (22)
3. Release both ISOfix connectors, by pushing down the release
buttons. (23) Slide the arms with ISOfix connectors inside the seat
before you remove the seat from the vehicle. To be able to slide
the arms with ISOfix connectors inside the seat, press the button
(between the red marks) on top of the ISOfix release handle down.
4. Remove the seat from the vehicle.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeSafe iZi Flex fix i-size at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe iZi Flex fix i-size in the language / languages: All languages as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info