495806
6
Zoom out
Zoom in
Previous page
1/9
Next page
10 11
Make sure that the harness straps are fixed in the right way,
after fitting the cover.
!
Removing the cover: alternative 1
Pay attention when you remove
the cover, as fitting the cover is
done in the opposite way.
The cover of the head rest
can be taken off separately by
disconnecting the hooks at the
backside and pulling off the fabric
to the front.
Start to take off the lower
seat part (15).
1-
3-
2-
Removing and refitting the cover
There are 2 versions of the
fabric cover. If there are
velcro squares (see green
arrow (13/14)), follow the
steps of alternative 1. If
there are no velcro squares
go to alternative 2.
Refit the cover
Mount the top part and then the shoulder parts. Mount the
seat part and bring the seat cover under the rear parts of
the sidewalls.
Pull the head rest in the highest position. Mount the head rest
cover and connect the hooks at the back side. Pull the harness
straps through the holes. Connect the loose bottom part of the
head rest fabric with the plastic part under the head rest.
Pull the harness straps through the opening of the seat cover
and lock the harness buckle. Pull the crotch strap through the
opening of the seat part.
3-
1-
2-
(13)
(14)
(15)
Removing the cover: alternative 2
Pay attention when you
remove the cover, as fitting
the cover is done in the
opposite way.
The cover of the head rest can be taken off
separately by disconnecting the hooks at the
backside and pulling off the fabric to the front.
1-
2-
3-
(16)
Refit the cover
Pull the harness straps through the opening of the seat cover
and lock the harness buckle. Pull the crotch strap through the
opening of the seat part.
Pull the loops of the harness straps from the bottom of the
seat part through the openings to the hooks in the bottom
of the seat. Hook both harness straps on the metal belt
hooks and pull the straps firmly to ensure that they are
correctly installed.
Pull the head rest in the highest position. Mount the head rest
cover and connect the hooks at the back side. Pull the harness
straps through the holes. Connect the loose bottom part of the
head rest fabric with the plastic part under the head rest.
2-
3-
1-
To remove the seat cover,
the harness straps must be
released at both sides. See
red circle. Start to take off the
lower seat part and unhook
both harness straps from the
metal belt hooks (16).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeSafe iZi Comfort X3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe iZi Comfort X3 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BeSafe iZi Comfort X3

BeSafe iZi Comfort X3 User Manual - German - 9 pages

BeSafe iZi Comfort X3 User Manual - Dutch - 9 pages

BeSafe iZi Comfort X3 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info