368215
11
Zoom out
Zoom in
Previous page
1/13
Next page
20 21
wash with similar colours
DO NOT use the seat without floor support when mounted
rearward-facing.
DO NOT use the seat without tightening the front brace when
mounted rearward-facing.
DO NOT use the seat without tightening the anchor belts
when mounted rearward-facing.
!
It is NOT ALLOWED to mount the seat in a front
passenger seat WITH AN ACTIVATED AIRBAG.
Install only with 3-point car belts, approved to
UN/ECE Regulation No. 16 or other equivalent
standards (39).
!
Warning: potential misuse
OK
NO
shoulder
belt
hip belt
(39)
Cleaning instructions
The cover of the seat must be washed according to the
instructions on the inside of the cover (38).
DO NOT use any aggressive cleaning products; these may
harm the construction material of the seat.
(38)
Make sure that the harness straps are fixed in the right way,
after fitting the cover.
!
Removing the cover: alternative 2
Pay attention when you
remove the cover, as fitting
the cover is done in the
opposite way.
The cover of the head rest can be taken off
separately by disconnecting the hooks at the
backside and pulling off the fabric to the front.
1-
2-
3-
(37)
Refit the cover
Pull the harness straps through the opening of the seat cover
and lock the harness buckle. Pull the crotch strap through the
opening of the seat part.
Pull the loops of the harness straps from the bottom of the
seat part through the openings to the hooks in the bottom of
the seat. Hook both harness straps on the metal belt hooks
and pull the straps firmly to ensure that they are correctly
installed.
Pull the head rest in the highest position. Mount the head rest
cover and connect the hooks at the back side. Pull the harness
straps through the holes. Connect the loose bottom part of the
head rest fabric with the plastic part under the head rest.
2-
3-
1-
To remove the seat cover,
the harness straps must be
released at both sides. See
red circle. Start to take off the
lower seat part and unhook
both harness straps from the
metal belt hooks (37).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeSafe combi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe combi in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BeSafe combi

BeSafe combi User Manual - German - 11 pages

BeSafe combi User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info