795903
61
Zoom out
Zoom in
Previous page
1/144
Next page
INSTALLING THE COOKER
INSTALLATION CONSIDERATIONS
The appliance complies with the provisions of directives
2014/35/EC (Low Voltage Directive) regarding electrical
safety and 2014/30/EC (EMC Directive) regarding
electromagnetic compatibility.
DANGER
Before connecting the appliance, check
that the data on the label applied to the rear
of the cooker are compatible with the
electrical system to which it is to be
connected. Make that the electrical system
and circuit breakers are suitably rated for
the maximum power stated on the sticker
on the back page of this document.
Use Table 10 Power supply systems and cable gauges for
guidance when installing electricity supply cables.
Table 10 Power supply systems and cable gauges
220-240V ~ 380-415V 2N~ 380-415V 3N~
3X10 mm24X4 mm25X2.5 mm2
Permitted cable types: H05VV-F, H05RR-F, H07RN-F.
MULTIPHASE ELECTRICAL CONNECTION
Cookers also intended for connection to multiphase
systems are normally prepared in the factory for connection
as specified in product data labels and the connection
diagram affixed to the product, in accordance with Table 10
Power supply systems and cable gauges.
INSTALLATION IN ENVIRONMENTS WHICH
CONTAIN OTHER COMBUSTION SYSTEMS
REQUIRING AMBIENT AIR
Combustion systems which require ambient air (e. g. gas,
oil, wood or coal stoves, instantaneous water heaters,
boilers) draw in combustion air from the room where they
are installed and convey their exhaust gases outdoors via a
gas venting system (e.g. a flue).
If the hob hood is used in ducted mood, it removes ambient
air from the installation site and adjoining rooms. If
sufficient air is not supplied to the environment, this creates
a vacuum and toxic gases are sucked back down the flue
into the other rooms.
If the hob extractor hood is operated simultaneously in the
installation site, make sure that:
the vacuum does not exceed 4 Pa (4 x 10–5 bar)
a technical safety device (e. g. proximity contact for
windows, vacuum pressure switch) is always used to
ensure a sufficient intake of fresh air
the exhaust air is not conveyed to a flue also used for
the exhaust gases from appliances which burn gas or
other fuels.
Fig. 42
For filtering appliances installed inside kitchen cabinets,
there must be a vent opening of ≥300 cm2. To enable
recycled air return, the vent opening required can be
created by shortening the plinth. A slatted plinth with the
61
61

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni PROCH94I1EXT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni PROCH94I1EXT in the language / languages: English, French, Italian as an attachment in your email.

The manual is 9,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bertazzoni PROCH94I1EXT

Bertazzoni PROCH94I1EXT User Manual - Dutch, Swedish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info