605227
38
Zoom out
Zoom in
Previous page
1/40
Next page
38
TROUBLESHOOTING
The oven will not operate
- Is there power to the cooker?
- Is he automatic programmer set to manual?
- The main oven will not operate manually if the programmer is set to automatic
mode. (See page 26)
- Confirm that power is on by checking that the clock is functioning
- Check the switch fuse or circuit breaker.
The burners will not ignite
- Is there power to the cooker?
- Are the ignition candles or burner holes blocked? Are the burner rings and
burner caps seated firmly?
- Confirm that power IS on by checking that the clock is functioning.
- Check the switch fuse or circuit breaker.
- Check that the ignition candle is clean and the burner slots are dry and free of
debris.
- The burner rings should engage in the burner support. (See page33)
The burner ignites but goes out when the knob is released
- The burners have flame failure devices fitted as
standard. Therefore, after
lighting the burner, keep the knob pressed in for 5-10 seconds to activate the
flame failure device.
The ignition candles are sparking continuously
- Is he hob wet from cleaning or a boil over?
- Turn off the
electricity
supply and thoroughly dry the burner components and
ignition candles.
The control knob are getting too hot
- Are you cooking with the oven door open?
- Keep the oven door shut when not in use or when grilling (the 100X60 triple
oven separate grill
compartment can be used for open door grilling for short periods only - max 15
min).
A control knob is loose on its shaft
- The knob retaining spring clip may have come out.
- Call our service and spares department for advice and a replacement if
necessary.
Food is cooking too quickly
- Are you using a fan function?
- Are you using the Quickstart function?
- When using a fan function you should reduce the cooking temperature by 20°C
when compared to conventional cooking. Please see the cooking charts on
page 30-31 for temperatures.
Quickstart is not suitable as a cooking function; it is only for pre-heating the oven.
Once the oven has reached temperature you should change aver to your required
cooking function. Quickstart should not be operated for more than 10 minutes.
Food is not cooking evenly
- Are you cooking large volumes of food or using large trays?
- Air needs to circulate through the oven far even cooking. Remove the grill pan
from the oven when not in use and always allow a gap on all four sides of
dishes. If cooking large quantities you may need to turn your trays during the
cooking time. Oversized baking sheets, roasting pans and cake tins will act as a
baffle and prevent hot air from travelling around the oven.
- Choose cooking equipment that allows a minimum of 2cm space on all sides to
allow the free movement of hot air.
The grill in the oven is slow
- Have you selected the correct function?
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni HER90 6 MFE DNET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni HER90 6 MFE DNET in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bertazzoni HER90 6 MFE DNET

Bertazzoni HER90 6 MFE DNET Usermanual and installation guide - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info