Manual Bernina DCE-T 2500 overlock (page 2 of 82) (English)

614494

Zoom out

Zoom in

1/82

Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions

should always be followed, including the following. Read all

instructions before using this overlock sewing machine.

DANGER

To reduce the risk of electric shock:

1. The appliance should never be left unattended when

plugged in.

2. Always unplug this appliance from the electric outlet

immediately after using and before cleaning.

3. Always unplug before relamping. Replace bulb with the

same type rated max.12 volts/5 watts.

WARNING

To reduce the risk of burns, fire, electric shock or injury

to persons:

1. Do not allow this appliance to be used as a toy. Close

attention is necessary when this appliance is used by or

near children.

2. Use this appliance only for its intended use as described

in this manual. Use only attachments recommended by

the manufacturer as contained in this manual.

3. Never operate this appliance if it has a damaged cord or

plug, if it is not working properly, if it has been dropped

or damaged or dropped into water. Return the appliance

to the nearest authorized dealer or service center for

examination, repair, electrical or mechanical adjustment.

4. Never operate the appliance with any air openings blo-

cked. Keep ventilation openings of the sewing machine

and foot controller free from accumulation of lint, dust

and loose cloth.

5. Keep fingers away from all moving parts. Special care is

required around the sewing needle and knife.

6. Always use the proper needle plate. The wrong plate can

cause the needle to break.

7. Do not use bent needles.

8. Do not pull or push fabric while stitching. It may deflect

the needle causing it to break.

9. Switch the sewing machine off («O») when making any

adjustments in the needle area, such as threading needle,

changing needle, threading looper, or changing presser

foot and the like.

10. Always unplug the machine from the electrical outlet

when removing covers, lubricating or when making any

other user servicing adjustments mentioned in the

instruction manual.

11. Never drop or insert any object into any opening.

12. Do not use outdoors.

13. Do not operate where aerosol (spray) products are being

used or where oxygen is being administered.

14. To disconnect, turn all controls to the off («0») position,

then remove plug from outlet.

15. Do not unplug by pulling on cord. To unplug, grasp the

plug not the cord.

16. Basically, the machine should be disconnected from the

electricity supply when not in use.

17. This appliance is provided with double insulation (except

USA/CANADA). Use only identical replacement parts. See

instructions for servicing of double insulated products.

SERVICING DOUBLE-

INSULATED PRODUCTS

(except USA/CANADA)

In a double-insulated product, two systems of insulation are

provided instead of grounding. No grounding means is

provided on a double-insulated product nor should a means

for grounding be added to the product. Servicing a double-

insulated product requires extreme care and knowledge of

the system and should only be done by qualified service

personnel. Replacement parts for a double-insulated product

must be identical to those parts in the product. A double

insulated product is marked with the words «DOUBLE

INSULATION» or «DOUBLE INSULATED».

The symbol may also be marked on the product.

SAVE THESE

INSTRUCTIONS!

This overlock/cover stitch machine is intended for household

use only.

2500_DCE_1_englisch_neu 09.10.2007 14:32 Uhr Seite 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina DCE-T 2500 overlock in the language / languages: English as an attachment in your email.

The manual is 6,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina DCE-T 2500 overlock

Bernina DCE-T 2500 overlock User Manual - German - 77 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina DCE-T 2500 overlock Manual

Product: