614730
73
Zoom out
Zoom in
Previous page
1/75
Next page
Before calling for service, check the following items. If the problem still persists, contact the
place of purchase or your nearest authorized dealer.
Upper thread
breaks
Lower thread
breaks
Skipped
stitches
Needle
breaks
Loose
stitches
Seam
gather or
pucker
1. The machine is not threaded correctly.
2. The thread tension is too tight.
3. The thread is too thick for the needle.
4. The needle is not inserted correctly.
5. The thread is wound around the spool
pin.
6. The needle is damaged.
1. The bobbin case is not inserted correctly.
2. The bobbin case is threaded wrong.
3. The lower thread tension is too tight.
1. The needle is not inserted correctly.
2. The needle is damaged.
3. The wrong size needle has been used.
4. The foot is not attached correctly.
5. The machine is not threaded correctly.
6. The presser foot pressure is not strong
enough.
1. The needle is damaged.
2. The needle is not correctly inserted.
3. Wrong needle size for the fabric.
4. The wrong foot is attached.
5. The needle clamp screw is loose.
6. The presser foot that is used is not
appropriate for the type of stitch
pattern that you wish to sew.
7. The upper thread tension is too tight.
1. The machine is not correctly threaded.
2. The bobbin case is not correctly
threaded.
3. Needle/fabric/thread combination is
wrong.
4. Thread tension is wrong.
1. The needle is too thick for the fabric.
2. The stitch length is adjusted wrong.
3. The thread tension is too tight.
1. Select a finer needle.
2. Readjust the stitch length.
3. Loosen the thread tension.
1. Check the threading.
2. Thread the bobbin case as illustrated.
3. The needle size must suit the fabric
and thread.
4. Correct the thread tension.
1. Insert a new needle.
2. Insert the needle correctly (flat side
towards the back).
3. Choose a needle to suit the thread
and fabric.
4. Select the correct foot.
5. Use the screwdriver to firmly tighten
the screw.
6. Attach the presser foot that is appro-
priate for the type of stitch that you
wish to sew.
7. Loosen the upper thread tension.
1. Remove and reinsert needle(flat side
towards the back).
2. Insert a new needle.
3. Choose a needle to suit the thread.
4. Check and attach correctly.
5. Rethread the machine.
6. Adjusting the presser foot pressure.
1. Remove and reinsert the bobbin case
and pull on the thread. The thread
should pull easily.
2. Check both bobbin and bobbin case.
3. Adjusting thread tension as described.
1. Rethread the machine.
2. Reduce the thread tension.
(Lower number).
3. Select a larger needle.
4. Remove and reinsert the needle (flat
side towards the back).
5. Remove the reel and wind thread onto
reel.
6. Replace the needle.
Trouble shooting guide
Problem
Cause
Correction Reference
12
16
20
11
12
11
10
10
16
11
11
20
28-29
12
16
11
20
20
28-29
11
28-29
16
12
20
16
8
20
25
16
72
Trouble Shooting
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Bernette Rome 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette Rome 8 in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina Bernette Rome 8

Bernina Bernette Rome 8 User Manual - German - 75 pages

Bernina Bernette Rome 8 User Manual - Dutch - 75 pages

Bernina Bernette Rome 8 User Manual - French - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info