Manual Bernina Bernette 340 Deco (page 2 of 75) (English)

614698

Zoom out

Zoom in

1/75

IMPORTANT SAFETY INSTRUCTIONS!

When using an electrical appliance, basic safety precautions should

always be followed, including the following:

Read all instructions before using this sewing computer. When the

sewing computer is not in use, it should be disconnected from the

electricity supply by removing the plug from the outlet.

DANGER

To reduce the risk of electrical shock:

1. An appliance should never be left unattended when plugged in.

2. Always unplug this sewing computer from the electrical outlet

immediately after using and before cleaning.

WARNING

To reduce the risk of burns, fire, electrical shock or injury to persons:

1. Do not allow to be used as a toy. Close attention is necessary

when this sewing computer is used by or near children and

infirm persons. This sewing computer is not intended for use by

persons (including children) with reduched physical, sensory or

mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use

of the sewing computer by a person responsible for their safety.

Children should be supervised to ensure that they do not play

with the sewing computer.

2. Use this sewing computer only for its inten ded use as described

in this manual. Use only attachments recommended by the

manu facturer as contained in this manual.

3. Never operate this sewing computer if:

 • ithasadamagedcordorplug,

 • itisnotworkingproperly

 • ithasbeendroppedordamaged,

 • ithasfallenintowater

Return the sewing computer to the nearest authorized BERNINA

dealer or service center for examination, repair, electrical or

mechanical adjustment.

4. Never operate the sewing computer with any air vents blocked.

Keep ventilation openings of the sewing computer and foot

controller free from accumulation of lint, dust and fabric

remnants and the like.

5. Keep fingers away from all moving parts. Special care is required

around the sewing needle.

6. Always use the BERNINA original stitch plate. The wrong plate

can cause needle breakage.

7. Do not use bent needles.

8. Do not pull or push fabric while stitching, this may deflect the

needle, causing it to break.

9. Turn power switch to «0» (off) when making any adjust ments in

the needle area, such as threading or changing the needle,

threading the bobbin or changing the presser foot etc.

10. Always unplug the sewing computer from the electrical outlet

when removing covers, lubricating or when making any other

user servicing adjustments mentioned in this instruction manual.

11. Never drop or insert any object into any openings on the sewing

computer.

12. Do not use the sewing computer outdoors.

13. Do not operate where aerosol (spray) products are being used or

where oxygen is being administered.

14. To disconnect, turn all controls to the off («0») position then

remove the plug from the outlet.

15. Do not unplug by pulling on the cord, instead, grasp the plug

before pulling.

16. No responsibility will be taken on behalf of BERNINA for any

possible damage as the result of misuse of the sewing computer.

17. Under no circumstances should the sewing computer be left

unattended when using the embroidery module.

18. This sewing computer is provided with double insulation (except

USA / Canada). Use only identical replacement parts. See

instructions for servicing of double-insulated machines.

SERVICING DOUBLE-

INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are

provided instead of grounding. No grounding means is provided on

a double-insulated product nor should a means for grounding be

added to the product. Servicing a double-insulated product requires

extreme care and knowledge of the system and should only be done

by qualified service personnel. Replacement parts for a double-

insulated product must be identical to those parts in the product. A

double insulated product is marked with the words «DOUBLE

INSULATION» or «DOUBLE INSULATED».

The symbol may also be marked on the product.

This sewing and embroidery computer is intended for

household use only.

SAVE THESE INSTRUCTIONS!

ENVIROMENTAL

PROTECTION

BERNINA is committed to environmental protection. We are

increasing the environmental friendliness of our products by

constantly improving them in terms of design and production

technologiy.

If you no longer require this product, please dispose of it in an

environmentally responsible fashion according to national guidelines.

Do not dispose of this product in your household waste. In case of

doubt, please contact your dealer.

Can Bernette Deco 340 be usef for normal stitching ? I would like to know before purchasing item. Submitted on 21-7-2020 at 13:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette 340 Deco in the language / languages: English as an attachment in your email.

The manual is 14,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina Bernette 340 Deco Manual

Product: