No electricity. Check that the plug is correctly inserted.
Pressing the start button the machine starts but the
working light does not come on.
Light is detective.
Do not use the machine if the light does not work.
Contact service for assistance.
The machine starts but the motor heats up too
much, it gives off a bad odour.
Defective motor.
Do not use the machine.
Contact service fort assistance.
The machine vibrates. The blade is not sharp. Contact service for assistance.
Excessive resistance in cutting the product. The blade is not sharp. Sharpen the blade.
The blade slows or stops under stress. Loose belt. Contact service for assistance.
Sharpening is no longer regular.
Grindstones are excessively dirty. Clean the grindstones.
Grindstones worn out.
Replace the grindstones; contact service for assi-
stance.
The blade is not sharp. Sharpen the blade.
The blade is excessively used
Replace the blade.
Contact service for assistance.
The machine does not stop when the stop button is
pressed.
Control circuit is defective.
Pull out the plug to stop the machine and immedia-
tely contact service for assistance.
The sliced product is frayed and irregular
WARNING: In this chapter the most common problems caused while using the slicing machine are listed together with the necessary operations to
eliminate the possible causes. If the problem persists ask for assistance from a qualified person authorized by the maker, do not insist on looking for the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Berkel BSPT at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Berkel BSPT in the language / languages: English as an attachment in your email.
The manual is 2,13 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
