140938
46
Zoom out
Zoom in
Previous page
1/48
Next page
Reference44
English
Troubleshooting
There are many external influences and circumstances beyond the control of BenQ which may
be causing problems with your TV. Some of the more common and user fixable problems are
listed below for your assistance.
Please check the following list before calling your nearest BenQ Customer Service Center, and
attempt the following steps to diagnose and fix the problem yourself:
Symptoms Possible Causes
Power does not turn ON.
Check that the power plug is securely inserted into both the
AC INLET socket on the TV and the wall outlet, and that
the wall outlet is switched on.
Check that power is available from the wall outlet by trying
another appliance or desk lamp from that same wall outlet.
There is no picture or sound.
Ensure the TV power is ON (indicated by the green Power
indicator on the front of the TV)
Try a different input source to check whether the source is
at fault.
Check for mis-connection of cables or for wrong input
source.
Make sure the antenna cable is properly connected.
Change programs to confirm if the symptom is still
present.
There are spots on the screen.
Your TV antenna signal is being affected by interference from
automobiles, trains, high-voltage transmission lines, neon
signs or another sources of interference. Try redirecting or
relocating your antenna to reduce the affects of the
interference. If the antenna is exterior, have a suitable
qualified and experienced antenna specialist adjust the
antenna.
Degraded colours or hue.
Check whether all the picture adjustments have been
properly performed.
•Press Preset/yellow button on the remote control to
select a different picture mode.
Improper screen position or
size.
Try selecting a different aspect ratio by pressing Aspect/
teletext size / on the remote control.
The image appears distorted.
Ensure the TV's aspect ratio is correctly set to suit the image
source.
The image appears too bright,
and there is a loss of definition
in the brightest areas of the
image.
Reduce the contrast setting.
The DVD player output level is too high. Reduce the
output level and try again.
The video signal has not been terminated properly
somewhere in the external equipment. Check the
connection and try again.
The image appears too 'washed
out', or the darkest areas of the
image appear too bright.
Reduce the brightness level till the black areas of the picture
appear as black.
The DVD player brightness level is too high. Reduce the
brightness level and try again.
"Out of range" appears.
The PC VGA input signal resolution is set too high. 1360 x
768 @ 60Hz is the highest acceptable PC timing.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ vl3735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ vl3735 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info