468359
24
Zoom out
Zoom in
Previous page
1/27
Next page
6. Additional Information
BenQ PE8700 User’s Manual
24
6. Additional Information
Warning Message
Replace the Lamp
It is normal for illumination from the lamp to dim
somewhat when the projector has been used for a
period of time.
The message "Lamplife is expired ! Please change a
new lamp. And reset the lamp timer." will be
displayed for 30 seconds on the screen when the
lamp has been in use for 1950 hours.
The message " Please change the lamp, Lamp will
exceed its lifetime after (hours): " will be displayed
on the screen for 30 seconds each time the
projector is turned on after the lamp has been in
use for 1980 hours. The number of hours will be
updated.
The message " Please change the lamp ! " will be
displayed on the screen continuously and the
POWER LED will flash orange and green
sequentially if the lamp has been in use for more
than 2,000 hours.
The projector will turn off automatically after 10
minutes.
1. Loosen the screws
on the front lamp
cover.
2. Remove the front lamp
cover.
3. Loosen the three
screws on the lamp
shield.
4. Take off the lamp
shield.
5. Loosen the two screws
on the lamp module.
6. Pull out the lamp
module horizontally.
7. Insert the new lamp
module into the
projector
horizontally until it
is securely in place.
8. Tighten the two
screws on the lamp
module.
9. Put on the lamp shield.
10. Tighten the three
screws on the lamp
shield.
Lamplife is expired!
Please change new lamp
And reset the lamp timer
Please change the lamp!
Lamp will exceed its
lifetime after (hours):
Please change the lamp!
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ PE 8700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ PE 8700 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info