214230
31
Zoom out
Zoom in
Previous page
1/35
Next page
31 Additional Information
Replacing the Lamp (Contact your BenQ dealer for
assistance)
CAUTION: The lamp may be very hot. Allow the projector to cool down for 45 minutes before replacing the
lamp.
Resetting the lamp counter
14. On the control panel, simultaneously press and hold the S, T, and POWER buttons for at least
3seconds.
Once the lamp life exceeds 1,500 hours, the lamp will not light, even after you replace it. The lamp
counter must be reset as soon as a new lamp is installed.
Do not reset the lamp life without replacing the lamp.
1. Loosen the screws
on the front lamp
cover.
2. Remove the front
lamp cover.
3. Loosen the three
screws on the
lamp shield.
4. Take off the lamp
shield.
5. Loosen the three
screws on the
lamp module.
6. Pull out the lamp
module
horizontally.
Pulling it too
quickly may cause
broken glass to scatter about if the bulb has broken.
Do not place the lamp in locations where water
might splash on it, children can reach it, or near
flammable materials.
Do not insert your hands into the box after the
lamp is removed. If you touch the optical component
inside, it could cause color unevenness and distortion
of the projected images.
7. Insert the new
lamp module
into the
projector
horizontally
until it is
securely in place.
8. Tighten the two
screws on the lamp module.
9. Put on the lamp
shield.
10. Tighten the three
screws on the
lamp shield.
11. Put on the front
lamp cover.
12. Tighten the
screws on front
lamp cover.
Loose screws
may cause a bad
connection, which
could result in malfunction.
Do not over tighten the screws.
13. Turn the power on and go into Environment
menu to reset the "Lamp Timer" item.
Power will not turn on while the lamp cover is
off.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ pe 7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ pe 7800 in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info