577368
57
Zoom out
Zoom in
Previous page
1/58
Next page
08/ 2012 57 / 58
BENNING ST 750 A
22. Warranty Terms
The BENNING ST 750 A is subject to stringent quality testing. In case of faults with regard to correct
functioning, we grant a warranty of 24 months. Manufacturing faults or material defects shall be
eliminatedbyusfreeofchargeasfarasthedeviceshowsmalfunctionwithoutexternalinuence
and is returned to us without having been opened. Damages caused by falls or incorrect use are
excluded from warranty.
23. Maintenance / Calibration
Maintenance
The device does not require any special maintenance. Please make sure that the surface is clean.
For cleaning, use a slightly moistened cloth. Do not use any cleaning agents, abrasives or solvents.
Exceptforspeciccalibrationintervals,thedevicedoesnotrequireanyspecialmaintenance.How-
ever, in case of malfunctions occurring, switch the device OFF (if necessary). First, check all
cable connections and check whether the device is supplied properly. Switch the device ON again.
Mostly, software problems can be eliminated by reinitialization of the device.
Calibration
According to DIN VDE 0701-0702, the following shall apply as of 1st June 2008:
"Themeasuringinstrumentsusedforperiodictestingshallbetestedandcalibratedregularly."
Feel free to make an appointment with us for testing and calibrating your testers.
Phone: +49 (0) 2871 / 93-555
Forouraddress,pleaserefertochapter24,"ProductSupport".
Return and Environmentally Sound Disposal
The device is considered to be a product of category 9 (monitoring and control instruments) as de-
nedintheGerman"ElektroG"(ElectricalandElectronicEquipmentAct).Thisdeviceisnotsubject
totheRoHSDirective.IncompliancewithWEEE2002/96/EGandtheGerman"ElektroG"(Electri-
cal and Electronic Equipment Act), we mark our electrical and electronic devices (as of 8/2005) with
the symbol shown on the right according to DIN EN 50419.
These devices must not be disposed of via the domestic waste. Regarding the return of waste elec-
trical and electronic equipment, please contact our Service team (for the address, see chapter 24).
23.1 Repair and Spare Parts Service
Incaseofneed,pleasecontactourProductSupportteam(seechapter24,"ProductSupport").
24. Product Support
Please contact the expert personnel of the supplier or manufacturer for further information.
BENNINGElektrotechnik&ElektronikGmbH&CoKG
Münsterstr. 135/137
D - 46397 Bocholt
Phone: +49 (0) 2871 / 93-0
Fax: +49 (0) 2871 / 93-429
Website: www.benning.de
BENNING Helpdesk phone no.: +49 (0) 2871 / 93-555
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 750A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 750A in the language / languages: English as an attachment in your email.

The manual is 7,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning ST 750A

Benning ST 750A User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info