747153
3
Zoom out
Zoom in
Previous page
1/3
Next page
Alarm clock Pro
Troubleshooting
Alarm clock accessories
The alarm clock can be complemented with the following accessories:
BE9105 Telephone cord
Use it to connect the landline telephone to the alarm clock
RJ11 input and be alerted when the telephone rings.
BE9250 Mobile phone sensor
Connect it to the ext. trig. input and place it on the
display to be alerted by incoming calls or messages.
BE9024 Contact mat
Connect it to the ext. trig. input to be alerted when
your spouse leaves the bed.
If Try this
The alarm clock seems to be turned o
Check that the power supply is connected correctly, see Getting started.
Charge the backup batteries for a couple of hours.
The symbol on the clock face
starts to blink
The power supply is disconnected and the backup batteries are nearly depleted.
Connect the power supply and charge the backup batteries for a couple of hours.
A symbol appears on the clock face
The alarm clock detects no backup batteries. Pull the battery tab, see Getting
started. If the problem remains, check the backup batteries.
A symbol appears on the clock face
The ash is turned o. Press the ash and sound on/o button marked with
until the symbol disappears if you wish to turn it back on.
A symbol appears on the clock face
The sound is muted. Press the ash and sound on/o button marked with
until the symbol disappears if you wish to turn it back on.
The display is too bright or too dark or
I want it to be permanently lit
Press the button marked with repeatedly to adjust the intensity in 4 steps.
Choose step 5 that results in permanent backlight.
The bed shaker does not vibrate
Make sure it’s connected properly to the alarm clock, see Getting started.
The alarm volume is too low
The volume increases gradually and reaches over 100 dB.
Settings
Flash and sound on/o
Press the ash and sound on/o button marked with on the back of the alarm clock repeatedly to toggle between
the options. A symbol will appear on the clock face when the ash is turned o and a symbol when the sound is
muted.
Display backlight
Press the button marked with repeatedly to adjust the intensity in 4 steps. Step 5 results in permanent backlight.
Time format
Press the time format button marked with 12/24h on the back of the alarm clock to toggle between a 24h and a 12h setting.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Symfon BE1370 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Symfon BE1370 Pro in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman Symfon BE1370 Pro

Bellman Symfon BE1370 Pro User Manual - All languages - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info