515351
2
Zoom out
Zoom in
Previous page
1/4
Next page
4) Remove and rinse the top lid.
5) Take out the brew basket and reducer, if used. Discard coffee grounds.
6) Rinse the boiler, brew basket, and reducer with hot water. No soap or scouring is necessary, and might leave a residue
which could affect coffee taste.
7) Wipe clean with a soft, dry cloth. Do not use abrasive cleaners or scouring pads on the surfaces, since permanent
scratching may result.
NOTE: For easier cleaning, clean off both the coffee and steam valves immediately after use.
HOW TO PREPARE ESPRESSO
A) Before operating, you will need to prepare:
1) Clean espresso maker
2) Finely ground espresso coffee
3) Espresso cups and clean carafe
4) Leveling spatula
B) Brewing procedure:
1) Unscrew and remove the tightening knob (A17).
2) Remove the top lid (A03).
3) Remove the brew basket (A10) and reducer (A06).
4) Rinse inside of the boiler, brew basket, and reducer, with hot water.
5) Fill water in the boiler up to the water level marking for the desired number of cups. The water level marking plate
(009) is on the inside of the boiler (A02), attached to the safety valve (A15).
DO NOT COVER THE SAFETY VALVE HOLE WITH WATER
6) If you desire 9 cups, remove the reducer from the brew basket. For 6 cups, insert the reducer, short end down, into
the brew basket. For 3 cups, insert the reducer short end up.
7) Fill the brew basket (A10) with coffee up to the rim, pack it down and level it off with a spatula or spoon.
8) Clean off excess coffee from the brew basket rim and silicon O-ring (gasket) in order to guarantee a tight seal.
9) Put the brew basket (A10) onto the main shaft (A08). Make sure the O-ring is resting against the underside of the
brew basket rim and on the boiler.
10) Replace the top lid (A03) onto the main shaft (A08) with the coffee valve (A12) opposite the handle.
11) Screw down the tightening knob (A17) clockwise as tightly as possible.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman CX-25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman CX-25 in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info