747160
3
Zoom out
Zoom in
Previous page
1/16
Next page
Appendix - Further information
Settings
No adjustments are required for normal use. The relevant descriptions are provided below,
if you wish to change a setting for some reason.
Radio key
In order to use several Bellman Visit Systems close to one another without interference,
dierent Radio Keys can be set on the dierent systems. All Bellman Visit System units are
supplied from the factory tuned to the same Radio Key, channel 0. This means that all Radio
Key Switches on the transmitters are set to the OFF position.
A Bellman Visit transmitter is also required to alter the radio key on the Bellman Visit Flash
Receiver. Proceed as follows to change the Radio Key:
Set a Bellman Visit Transmitter to the desired Radio Key by altering its Radio Key
Switch to the desired Radio Key. See the transmitter user manual for further information.
Hold down the Test Button (9) on the Bellman Visit Flash Receiver until the green
and yellow
LEDs blink alternately. The Bellman Visit Flash Receiver will now be in
programming mode for about 30 seconds.
Press the Bellman Visit transmitter’s test button.
The LEDs
will now blink ve times in quick succession to indicate a
successful change of radio key.
After changing the radio key, the Bellman Visit Flash Receiver will automatically return
to normal mode.
Please note: all Bellman Visit products within a system must be tuned to the same Radio
Key in order to operate as a group.
Signal pattern
A Signal Pattern is the name for the way in which a receiver in the Bellman Visit System indi-
cates activation. Changing the transmitters Signal Switch changes the Signal Pattern which
the receivers display when the transmitter is activated.
The following signal patterns are available for the Bellman Visit System: (Please note that
the Flash Receiver does not emit any sound):
3
GB
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman BE1443 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman BE1443 in the language / languages: German as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info