515366

Bellman Babyfoonzender Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
Indicators and Signals
System indicators
The LED (1) lights up when the Baby Cry Transmitter transmits radio signals.
Power supply
When the Baby Cry Transmitter is activated, the LED (1) lights up green. This means that the
battery is in good condition.
If the LED (1) lights up yellow, this means that the battery is flat and must be changed. Only use
an alkaline 6LR61 or a lithium 6F22 type battery.
Troubleshooting in brief
PROBLEM SO LUT ION
N othing happens when the
transmitter is activated.
Check that the Baby Cry Transmitter is switched on.
Change the battery. Only use an alkaline 6LR61 or a lithium
6F22 type battery.
The LED (1) lights up yellow when
the Baby Cry Transmitter is
activated.
Change the battery. Only use an alkaline 6LR61 or a lithium
6F22 type battery.
The LED (1) lights up green when
the Baby Cry Transmitter is
activated, but the receivers are not
signalling.
Check the battery in the receiver.
Check that the receivers are not placed too far away by
moving them closer to the transmitter.
Check that the Baby Cry Transmitter is set to the correct
radio key. For further information see Function/Radio key.
The Baby Cry Transmitter does not
signal even though the child is crying.
Increase the sensitivity using the sound sensitivity switch (4)
or place the Baby Cry Transmitter closer to the child, but
not close enough for the child to reach it. For further
information see Function/General.
The
Baby Cry Transmitter transmits
a signal even though the baby is not
making much noise.
Reduce the sensitivity using the sound sensitivity switch (4)
or move the Baby Cry Transmitter further away from the
child. For further information see Function/General.
the Baby Cry Transmitter transmits
a signal to the receiver.
Reduce the delay time using the Delay Switch (7). For
further information see Function/General.
The Baby Cry Transmitter transmits
a signal even though the baby only
cries for a short time.
Increase the delay time using the Delay Switch (7). For
further information see Function/General.
The receiver signals when no
transmitter is activated.
Ch
ange the Radio Key on all units in the system. For further
information see Function/Radio key
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Babyfoonzender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Babyfoonzender in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info