653212
18
Zoom out
Zoom in
Previous page
1/20
Next page
If desired, the wok ring should be located on top of the pan supports. The locating cutouts on the bot-
tom of the wok ring engage with the four ngers of the pan supports around the centre burner location.
Ensure the wok ring is located correctly, is fully engaged with the pan support ngers and is not able to
rotate or slide across the pan supports before use. Always locate the wok ring before lighting the burn-
er.
Note: Due to the temperatures the wok ring will operate under during use, discolouration will occur.
Metal Lid (Dual Fuel Models Only)
If your Dual Fuel appliance is tted with a Metal lid then this is NOT designed to cut off all hob burners
when closed. Your hob burners are manufactured with ame supervision devices so in the event of this
lid being closed accidentally the burners will be starved of oxygen thus cutting off the gas supply.
Plate rack (if supplied)
1. Pull the shelf out of the cavity.
2. Tilt the plate warmer towards you and make sure that it hooks underneath the shelf bars at the front.
3. Drop the plate warmer carefully into position.
The plate warmer is now secure and you can place your plates into it.
Always make sure that you use oven gloves if you are putting the plate warmer into a hot, or recently
used oven to prevent burns.
Always make sure that your plates are suitable for warming - some plates may shatter or crack when
exposed to heat.
We recommend that you heat the oven to 70°C, or below, if you are warming plates.
TheGriddle(iftted)
Only use the griddle which has been approved for use on this appliance. Do not use any other griddle,
as this may be hazardous.
1. Place the griddle carefully on the pan support over the burners, using the locating feet on the un-
derside of the griddle. Take care to avoid damage to the surface of the pan supports. The griddle
should only be positioned front-to-back over the burners indicated by the griddle symbol on the
fascia panel.
2. Heat the griddle on full rate for 3 minutes. The griddle plate is now ready for use.
18


Need help? Post your question in this forum.

Forumrules
1

Forum

belling-cookcentre-100g

Reset search

  • How do you change the oven sensor on a country 100g range cooker Submitted on 15-12-2021 at 20:14

    Reply Report abuse
  • How do you change the oven sensor on a country range 100g cooker Submitted on 15-12-2021 at 20:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belling Cookcentre 100G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belling Cookcentre 100G in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info