Manual Beldray BEL0196 (page 8 of 13) (English)

777017

Zoom out

Zoom in

1/13

THE SCIENCE

BEHIND HEAT

Filling the Water Tank

Unplug the steam mop from the mains power supply.

Remove the water tank from the steam mop main body and then open the water tank cap by

twisting it in an anticlockwise direction. Fill the water tank (taking care not to overﬁll it) using the

tap and then close.

Place the water tank back onto the steam mop main body until it clicks into place.

Using the Steam Mop

Plug the steam mop into the mains power supply.

The indicator light will illuminate red to show that it is heating up.

The steam mop will take approximately 25 seconds to heat up. Once it has reached the correct

temperature, the indicator light will change to blue; the steam mop is now ready to use.

Note: Never allow the water in the tank to drop below the minimum level mark.

Cleaning and Maintenance

Before attempting any cleaning or maintenance, always unplug the steam mop from the mains

power supply and allow it to cool sufﬁciently.

Drain any remaining water from the water tank and clean it after every use.

Wipe the steam mop main body with a soft, damp cloth and allow to dry thoroughly.

Clean the triangular mop head in warm, soapy water, rinse and dry thoroughly.

Never immerse the electrical components of the steam mop in water or any other liquid.

The steam mop water tank and accessories are not suitable for dishwasher use.

Do not use harsh or abrasive cleaners or detergents.

The mop pad is machine washable on a ‘warm’ setting. Always use a mild detergent and lay it ﬂat

to dry. Never use bleach or fabric softener when washing the mop head pad.

Warning: Do not turn on the steam mop during cleaning.

Removing Limescale

If the steam mop begins to produce steam slower than usual or stops producing steam

altogether, you may need to remove limescale. Limescale can develop over time on the metal

parts of the steam mop and greatly affects performance.

It is necessary to remove limescale on a regular basis, every 25-50 times you use a full tank of

water or at least once a month, especially in areas with hard water.

The frequency of limescale removal depends upon the hardness of your tap water and usage.

Calcium deposits may be emitted with the steam. Please descale in a sink, bucket or towel to

protect carpets etc.

STEP 1: To remove the limescale, prepare a solution of white vinegar and tap water and add it

to the water tank.

BEL0196 Steam Mop with Back Saving Function 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beldray BEL0196 in the language / languages: English as an attachment in your email.

The manual is 0.78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beldray BEL0196 Manual

Product: