777015
6
Zoom out
Zoom in
Previous page
1/9
Next page
THE SCIENCE
BEHIND CLEAN
Refilling During Operation
Disconnect the appliance from the power supply.
Press and hold the steam button until the steam stops to release the pressure.
Slowly unscrew the safety cap but do not remove it.
The residual steam will slowly discharge. Allow the appliance to cool for approximately 5 minutes
and then remove the cap.
Use the measuring cup to refill the required amount of water to the tank. Reposition the safety
cap and tighten into place.
After Use
After using the appliance, switch off and disconnect from the power supply. Press and hold the
steam button to release the pressure.
Slowly unscrew the safety cap but do not remove it. The residual steam will discharge slowly.
Allow the appliance to cool for approximately 5 minutes and then completely remove the cap.
Empty the residual water from the tank and clean the external surface with a dry cloth.
Install the safety cap and tighten into position.
Troubleshooting
Symptom Possible Cause Solution
Steam pressure is low. Tank is overfull. Do not attempt to open the
filler as steam will escape and
could cause injury. Continue
to use the appliance and the
pressure will increase.
Steam pressure reducing. Tank is nearly empty. Refill the water tank –
refer to instructions.
Water emitted and no steam. Tank has been overfilled. Switch off and allow to cool.
Release the pressure, empty
and then refill with 220ml of
water.
BEL0187 1000W Steam Cleaner 7
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray BEL0187 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray BEL0187 in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info