556809
45
Zoom out
Zoom in
Previous page
1/48
Next page
45 / EN
Washing Machine / User’s Manual
Problem Reason Solution
Detergent residue in the
detergent drawer. (**)
Detergent is put in wet drawer. Dry the detergent drawer before putting
in detergent.
Detergent has gotten damp. Keep detergents closed in an environment
free of humidity and do not expose them
to excessive temperatures.
Water pressure is low. Check the water pressure.
The detergent in the main wash compartment
got wet while taking in the prewash water.
Holes of the detergent compartment are
blocked.
Check the holes and clean if they are
clogged.
There is a problem with the detergent drawer
valves.
Call the Authorized Service Agent.
Detergent might be mixed with the softener. Do not mix the softener with detergent.
Wash and clean the dispenser with hot
water.
Regular drum cleaning is not applied. Clean the drum regularly. For this, please
see 4.7.2.
Too much foam forms in
the machine. (**)
Improper detergents for the washing machine
are being used.
Use detergents appropriate for the
washing machine.
Excessive amount of detergent is used. Use only sufficient amount of detergent.
Detergent was stored under improper
conditions.
Store detergent in a closed and dry
location. Do not store in excessively hot
places.
Some meshed laundry such as tulle may foam
too much because of their texture.
Use smaller amounts of detergent for this
type of item.
Detergent is put in the wrong compartment. Put the detergent in the correct
compartment.
Softener is being taken early. There may be problem in the valves
or in the detergent dispenser. Call the
Authorized Service Agent.
Foam is overflowing from
the detergent drawer.
Too much detergent is used. Mix 1 tablespoonful softener and ½
l water and pour into the main wash
compartment of the detergent drawer.
Put detergent into the machine suitable
for the programmes and maximum
loads indicated in the “Programme and
consumption table”. When you use
additional chemicals (stain removers,
bleachs and etc), reduce the amount of
detergent.
Laundry remains
wet at the end of the
programme. (*)
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent
usage.
Use recommended amount of detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum
to prevent any damage to the machine and to its surrounding environment. Laundry should be
rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A
CAUTION: If you cannot eliminate the problem although you follow the instructions in this section,
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMG10454 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMG10454 in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info