550081
4
Zoom out
Zoom in
Previous page
1/52
Next page
4
EN
• Topreventflowingofdirtywaterbackintothemachine
and to allow for easy discharge, do not immerse the
hose end into the dirty water or drive it in the drain more
than15cm.Ifitistoolong,cutitshort.
• Theendofthehoseshouldnotbebent,itshouldnotbe
stepped on and the hose must not be pinched between
the drain and the machine.
• Ifthelengthofthehoseistooshort,useitbyadding
anoriginalextensionhose.Lengthofthehosemay
not be longer than 3.2 m. To avoid water leak failures,
the connection between the extension hose and the
drain hose of the product must be fitted well with an
appropriate clamp as not to come off and leak.
Adjusting the feet
A
Inordertoensurethattheproductoperatesmoresilent
andvibration-free,itmuststandlevelandbalancedon
its feet. Balance the machine by adjusting the feet.
Otherwise, the product may move from its place and
cause crushing and vibration problems.
1. Loosenthelocknutsonthefeetbyhand.
2. Adjust the feet until the product stands level and
balanced.
3. Tighten all lock nuts again by hand.
A
Donotuseanytoolstoloosenthelocknuts.Otherwise,
they will get damaged.
Electrical connection
Connect the product to a grounded outlet protected by a fuse
complying with the values in the "Technical specifications"
table. Our company shall not be liable for any damages that
will arise when the product is used without grounding in
accordance with the local regulations.
• Connectionmustcomplywithnationalregulations.
• Powercableplugmustbewithineasyreachafter
installation.
• Thevoltageandallowedfuseorbreakerprotectionare
specifiedinthe“Technicalspecifications”section.Ifthe
current value of the fuse or breaker in the house is less
than16Amps,haveaqualifiedelectricianinstalla16
Amp fuse.
• Thespecifiedvoltagemustbeequaltoyourmains
voltage.
• Donotmakeconnectionsviaextensioncablesormulti-
plugs.
B
Damagedpowercablesmustbereplacedbythe
Authorized Service Agents.
First use
Before starting to use the product, make sure that all
preparations are made in accordance with the instructions in
sections"Importantsafetyinstructions"and"Installation".
To prepare the product for washing laundry, perform first
operationinDrumCleaningprogramme.Ifyourmachineis
notfeaturedwithDrumCleaningprogramme,useCottons-90
programme and select Additional Water or Extra Rinse
auxiliary functions as well. Before starting the programme,
putmax.100gofpowderanti-limescaleintothemain
washdetergentcompartment(compartmentnr.II).Ifthe
anti-limescaleisintabletform,putonlyonetabletinto
compartmentnr.II.Drytheinsideofthebellowwithaclean
piece of cloth after the programme has come to an end.
C
Useananti-limescalesuitableforthewashing
machines.
C
Some water might have remained in the product due to
thequalitycontrolprocessesintheproduction.Itisnot
harmful for the product.
Disposing of packaging material
Packagingmaterialsaredangeroustochildren.Keep
packaging materials in a safe place away from reach of the
children.
Packaging materials of the product are manufactured from
recyclablematerials.Disposeofthemproperlyandsortin
accordancewithrecycledwasteinstructions.Donotdispose
of them with normal domestic waste.
Transportation of the product
Unplugtheproductbeforetransportingit.Removewaterdrain
andwatersupplyconnections.Draintheremainingwaterin
theproductcompletely;see,"Drainingremainingwaterand
cleaningthepumpfilter".Installtransportationsafetyboltsin
thereverseorderofremovalprocedure;see,"Removingthe
transportation locks".
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMB 91242 LC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 91242 LC in the language / languages: English, French as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info