Manual BEKO WMB 81441 (page 68 of 72) (English, German, Dutch, French)

475972

Zoom out

Zoom in

1/72

PressStart/Pause/Cancelbutton.“:”signinthe

middleofthedelayedstarttimeonthedisplaystops

flashing.Pausesymbolappears.DelayedStart

symbolflashes.Startsymboldisappears.Setthe

desireddelayedstarttimebypressingtheDelayed

Start+or-buttons.PressStart/Pause/Cancel

button.DelayedStartsymbolilluminatessteadily.

Pause symbol disappears. Start symbol appears.

“:”signinthemiddleofthedelayedstarttimeonthe

displaystartsflashing.

Canceling the Delayed Start function

Ifyouwanttocancelthedelayedstartcountdown

and start the programme immediately:

PressStart/Pause/Cancelbutton.“:”signinthe

middleofthedelayedstarttimeonthedisplaystops

flashing.Startsymboldisappears.Pausesymbol

andDelayedStartsymbolflashes.Decreasethe

delayedstarttimebypressingtheDelayedStart

-button.Programmedurationappearsafter30

minutes.PressStart/Pause/Cancelbuttontostart

the programme.

Starting the programme

PressStart/Pause/Cancelbuttontostartthe

programme.Startsymbolshowingthestartupof

theprogrammewillturnon.Loadingdoorislocked

andDoorLockedsymbolappearsonthedisplay.

Thesymbolofthestepfromwhichtheprogramme

hasstartedappearsonthedisplay(Prewash,Main

Wash,Rinse,SoftenerandSpin).

Progress of programme

Progressofarunningprogrammeisindicatedonthe

displaywithasetofsymbols.

Relevant symbol appears on the display at

thebeginningofeachprogrammestepandall

symbolsremainlitattheendoftheprogramme.

Thefarthermostrightsymbolindicatesthecurrent

programme step.

Prewash

IfthePrewashauxiliaryfunctionisselected,Prewash

symbol appears on the display indicating that the

prewashstephasstarted.

Main Wash

MainWashsymbolindicatingthatthemainwash

step has started appears on the display.

Rinse

Rinse symbol indicating that the rinsing step has

started appears on the display.

Softener

Softenersymbolindicatingthatthesoftenerstephas

started appears on the display.

Spin

Appearsatthebeginningofthefinalspinstep

and remains lit during Spin and Pump special

programmes.

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactiveorthe

automatic unbalanced load detection system

might be activated due to the unbalanced

distributionofthelaundryinthemachine.

Loading door lock

Thereisalockingsystemontheloadingdoorofthe

machinethatpreventsopeningofthedoorincases

whenthewaterlevelisunsuitable.

DoorLockedsymbolappearswhentheloading

doorislocked.Thissymbolwillflashuntiltheloading

doorbecomesreadytoopenwhenprogramme

completesorthemachineispaused.Donotforce

to open the loading door in this step. Symbol

disappearswhenthedoorisreadytoopen.Youcan

openthedoorwhenthesymboldisappears.

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pause/Cancelbuttontoswitchthe

machine to pause mode. Pause symbol appears on

the display indicating that the machine is paused.

Start symbol disappears.

Changing the speed and temperature settings

for auxiliary functions

Dependingonthesteptheprogrammehasreached,

youmaycanceloractivatetheauxiliaryfunctions;

see,"Auxiliaryfunctionselection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

Adding or taking out laundry

PresstheStart/Pause/Cancelbuttontoswitch

the machine to pause mode. The programme

follow-uplightoftherelevantstepduringwhichthe

machinewasswitchedintothepausemodewill

flash. WaituntiltheLoadingDoorcanbeopened.

OpentheLoadingDoorandaddortakeoutthe

laundry.ClosetheLoadingDoor.Makechangesin

auxiliaryfunctions,temperatureandspeedsettings

ifnecessary.PressStart/Pause/Cancelbuttonto

start the machine.

 Theloadingdoorwillnotopenifthewater

temperatureinthemachineishighorthewater

level is above the door opening.

Child Lock

UseChildLockfunctiontopreventchildrenfrom

tamperingwiththemachine.Thusyoucanavoidany

changes in a running programme.

 Youcanswitchonandoffthemachinewith

On/OffbuttonwhentheChildLockisactive.

Whenyouswitchonthemachineagain,

programmewillresumefromwhereithas

stopped.

ToactivatetheChildLock:

Press and hold 2

and 4

Auxiliary Function buttons

for3seconds.“Con”appearsonthedisplay.

 Samephrasewillappearonthedisplayifyou

pressanybuttonwhenChildLockisenabled.

TodeactivatetheChildLock:

Press and hold 2

and 4

Auxiliary Function buttons

for3seconds.“COFF”appearsonthedisplay.

 Donotforgettodisablethechildlockatthe

endoftheprogrammeifitwasenabledbefore.

Otherwise,machinewillnotallowtoselecta

newprogramme.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 81441 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB 81441 Manual

Product: