491460
64
Zoom out
Zoom in
Previous page
1/68
Next page
64
EN
Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programmefollow-uplightshowingthestartupof
theprogrammewillturnon.
C
Ifnoprogrammeisstartedornokeyis
pressedwithin1minuteduringprogramme
selectionprocess,themachinewillswitch
toPausemodeandtheilluminationlevelof
the temperature, speed and loading door
indicatorlightswilldecrease.Otherindicator
lightsandindicatorswillturnoff.Oncethe
ProgrammeSelectionknobisrotatedor
any button is pressed, indicator lights and
indicatorswillturnonagain.
Child Lock
UseChildLockfunctiontopreventchildrenfrom
tamperingwiththemachine.Thusyoucanavoid
any changes in a running programme.
C
IftheProgrammeSelectionknobisturned
whentheChildLockisactive,"Con"appears
onthedisplay.TheChildLockdoesnot
allowanychangeintheprogrammesandthe
selected temperature, speed and auxiliary
functions.
C
Evenifanotherprogrammeisselectedwith
theProgrammeSelectionknobwhiletheChild
Lockisactive,previouslyselectedprogramme
willcontinuerunning.
ToactivatetheChildLock:
Pressandhold1
st
and 2
nd
Auxiliary Function
buttonsfor3seconds.Thelightsonthe1
st
and
2
nd
AuxiliaryFunctionbuttonswillflash,and
"C03","C02","C01"willappearonthedisplay
respectivelywhileyoukeepthebuttonspressed
for3seconds.Then,"Con"willappearonthe
displayindicatingthattheChildLockisactivated.
IfyoupressanybuttonorturntheProgramme
SelectionknobwhentheChildLockisactive,
samephrasewillappearonthedisplay.Thelights
onthe1stand2ndauxiliaryfunctionbuttonsthat
areusedtodeactivatetheChildLockwillblink3
times.
TodeactivatetheChildLock:
Pressandhold1
st
and 2
nd
auxiliaryfunction
buttonsfor3secondswhileanyprogrammeis
running.Thelightsonthe1
st
and 2
nd
Auxiliary
Functionbuttonswillflash,and"C03","C02",
"C01"willappearonthedisplayrespectivelywhile
youkeepthebuttonspressedfor3seconds.
Then,"COFF"willappearonthedisplayindicating
thattheChildLockisdeactivated.
C
Inadditiontothemethodabove,todeactivate
theChildLock,switchtheProgramme
SelectionknobtoOn/Offpositionwhenno
programme is running, and select another
programme.
C
ChildLockisnotdeactivatedafterpower
failuresorwhenthemachineisunplugged.
Progress of programme
Progressofarunningprogrammecanbefollowed
fromtheProgrammeFollow-upindicator.At
thebeginningofeveryprogrammestep,the
relevantindicatorlightwillturnonandlightofthe
completedstepwillturnoff.
Youcanchangetheauxiliaryfunctions,speed
andtemperaturesettingswithoutstoppingthe
programmeflowwhiletheprogrammeisrunning.
Todothis,thechangeyouaregoingtomakemust
beinastepaftertherunningprogrammestep.If
thechangeisnotcompatible,relevantlightswill
flashfor3times.
C
Ifthemachinedoesnotpasstothespinning
step,RinseHoldfunctionmightbeactive
or the automatic unbalanced load detection
system might be activated due to the
unbalanceddistributionofthelaundryinthe
machine.
Loading door lock
Thereisalockingsystemontheloadingdoorof
themachinethatpreventsopeningofthedoorin
caseswhenthewaterlevelisunsuitable.
Loadingdoorlightwillstartflashingwhenthe
machineisswitchedtoPausemode.Machine
checksthelevelofthewaterinside.Ifthelevelis
suitable,LoadingDoorlightilluminatessteadily
within1-2minutesandtheloadingdoorcanbe
opened.
Ifthelevelisunsuitable,LoadingDoorlightturns
offandtheloadingdoorcannotbeopened.If
youareobligedtoopentheLoadingDoorwhile
theLoadingDoorlightisoff,youhavetocancel
the current programme; see "Canceling the
programme".
Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthe
machinetopausemodewhileaprogrammeis
running.Thelightofthestepwhichthemachine
isinstartsflashingintheProgrammeFollow-up
indicatortoshowthatthemachinehasbeen
switchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,
LoadingDoorlightwillalsoilluminatecontinuously
in addition to the programme step light.
Changing the speed and temperature settings
for auxiliary functions
Dependingonthesteptheprogrammehas
reached, you may cancel or activate the auxiliary
functions;see,"Auxiliaryfunctionselection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
C
Ifnochangeisallowed,therelevantlightwill
flashfor3times.
Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthe
machinetopausemode.Theprogrammefollow-
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMB 71632 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 71632 A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info