496327
12
Zoom out
Zoom in
Previous page
1/15
Next page
12 XENYX 1202FX/1002FX User Manual
5. Specications
Mono Inputs
Microphone Inputs
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -132.7 dB / 137 dB A-weighted
@ 50 Ω source resistance -130 dB / 133.9 dB A-weighted
@ 150 Ω source resistance -127.1 dB / 130.9 dB A-weighted
Frequency response <10 Hz - 200 kHz (-1 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio -107 dB / -111 dB A-weighted
(0 dBu In @ +22 dB gain)
Distortion (THD + N) 0.005% / 0.003% A-weighted
Line Input
Type ¼" TRS connector
electronically balanced
Impedance approx. 20 kΩ balanced
approx. 10 kΩ unbalanced
Gain range -10 to +40 dB
Max. input level +20 dBu @ 0 dB Gain
Fade-Out Attenuation
1
(Crosstalk Attenuation)
Main fader closed 85 dB
Channel fader closed 88 dB
Frequency Response
Microphone Input to Main Out
<10 Hz - 80 kHz +0 dB / -1 dB
<10 Hz - 137 kHz +0 dB / -3 dB
Stereo Inputs
Type ¼" TRS connector,
electronically balanced
Impedance approx. 20 kΩ bal. / 10 kΩ unbal.
(+4 dBu operating level)
approx. 20 kΩ bal. / 5 kΩ unbal.
(-10 dBV)
Max. input level +22 dBu
EQ Mono Channels
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
Audio Outputs
FX Send
Type ¼" TRS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Main Outputs
Type ¼" TRS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Control Room Outputs
Type ¼" TRS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Headphones Output
Type ¼" TRS connector, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
Main Mix System Data
2
Noise
Main mix @ -∞, -105 dB / -108 dB A-weighted
Channel fader -∞
Main mix @ 0 dB, -94 dB / -97 dB A-weighted
Channel fader -∞
Main Mix @ 0 dB, -83 dB / -85 dB A-weighted
Channel fader @ 0 dB
FX Section
Converter 24-bit Sigma-Delta
Sampling rate 40 kHz
Mains Voltage
USA/Canada 120 V~, 60 Hz, MXUL6 adapter
U.K./Australia 240 V~, 50 Hz, MXUK6 adapter
Europe 230 V~, 50 Hz, MXEU6 adapter
China/Korea 220 V~, 50 Hz, MXCN6 adapter
Japan 100 V~, 60 Hz, MXJP6 adapter
Output 2 x 14.8 V~, 2 x 500 mA
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx 1002FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx 1002FX in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Xenyx 1002FX

Behringer Xenyx 1002FX User Manual - German - 14 pages

Behringer Xenyx 1002FX User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info