Manual Behringer X32 (page 63 of 70) (English)

542086

Zoom out

Zoom in

1/70

63 X32 DIGITAL MIXER Preliminary User Manual

7.13 Scenes Screen

The scenes screen allows setup for saving and recalling dierent memory scenes

of the console. The comprehensive recallability of the console (including gain

settings for the digitally controlled mic preamps) is one of the most powerful

aspects of the console.

The scenes screen contains the following separate tabs:

HOME: This screen contains a general overview of the scenes contained in the

console, along with their custom names and what parameters are included in

each scene.

MIDI: This screen allows the console to associate dierent scenes with incoming

and outgoing MIDI messages, allowing the console’s scene changes to control or

be controlled by external MIDI equipment.

PARAMETER SAFE: This screen congures which console parameters are and are

not saved/switched with the console scenes.

CHANNEL SAFE: This screen congures which console channels are and are not

changed when a console scene change occurs.

7.13.1 Scenes Screen: Home Tab

The scenes screen’s home tab shows a general overview of the scenes that

have been congured in the console, along with their custom names and what

parameters are included in each scene.

For a setting where scenes are used heavily and are very critical (such as a theater

performance), this would be a good screen to leave on at all times so that the

console operator can be completely sure, at all times, what scene the console

currently resides on and what scene will come up next when the “Go” button

ispressed.

To adjust the various settings on the home tab, perform the following steps:

1. Rotate the 1st encoder to scroll among the available scenes in the scenes list,

which is displayed on the left side of the color screen.

2. Tap the 1st encoder to “go” to the currently selected scene in the list,

switching the console to the state it was in when that scene was stored

3. Rotate the 2nd encoder to select a scene in the list to be “skipped”

whencycling through scenes using the Prev and Next buttons.

4. Tap the 2nd encoder to complete the “skip” command on the currently

selected scene. That scene will now be skipped when scrolling through

thelist.

5. Rotate the 3rd encoder to scroll back through recent changes.

6. Tap the 3rd encoder to undo the recent change.

7. Rotate the 4th encoder to select a slot to save a new scene.

8. Tap the 4th encoder to complete the save operation. The console’s current

state will be overwritten on the scene number that was selected with

theencoder.

9. Rotate the 6th encoder to select which aspects of the console’s routing

are made “safe” from a scene change, and will be unaected by any scene

changes that occur. Routing choices that can be safed include:

• Routing

• Output Patch

• Mic Preamp Gain (HA, short for head-amplier)

• Conguration

• Channel Processing

• Mix Buses

• Eects

• Talkback

10. Tap the 6th encoder to select any of the above choices as the encoder

rotation is used to select them. Multiple categories can be selected at the

same time.

7.13.2 Scenes Screen: MIDI Tab

This MIDI tab of the scenes screen allows the console to associate dierent

scenes with incoming and outgoing MIDI messages, allowing the console’s scene

changes to control or be controlled by external MIDI equipment.

For instance, the user could congure the console to issue a MIDI program

change message as each new scene is recalled, with the outgoing MIDI message

triggering a new scene of a MIDI-equipped lighting controller.

Conversely, the user could congure the console to change scenes in response

to an incoming MIDI program change message, allowing the console to

switch to a new audio scene when a new scene is recalled on a MIDI-equipped

lightingcontroller.

To adjust the various settings on the MIDI tab, perform the following steps:

1. Rotate the 1st encoder to select a scene to edit.

2. Tap the 2nd encoder to “safe” the console from any incoming MIDI messages,

preventing the console from switching scenes in response to MIDI data.

3. Rotate the 3rd encoder to select what type of MIDI event is transmitted by

the console when a scene change is issued. The choices include:

• O (No MIDI event)

• MIDI program change

• MIDI control change

• Note

4. Encoders 4,5 and 6 adjust the channel, number, and velocity (if applicable).

The color screen displays the MIDI data associated with the currently

selectedscene.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 in the language / languages: English as an attachment in your email.

The manual is 11,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32

Behringer X32 Quick start guide - English, German, French, Portuguese, Spanish - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Behringer X32 Manual

Product: