Manual Behringer X32 (page 47 of 70) (English)

542086

Zoom out

Zoom in

1/70

47 X32 DIGITAL MIXER Preliminary User Manual

7.4 Routing Screen

The routing screen is where all signal patching is done, allowing you to route

internal signal paths to and from the physical input/output connectors located on

the console’s rear panel.

The routing screen contains the following separate tabs:

1. Home: Allows patching of physical inputs to the 32 input channels and

Auxinputs of the console.

2. Analog Out: Allows patching of internal signal paths to the console’s

16 rear-panel XLR outputs.

3. Aux Out: Allows patching of internal signal paths to the console’s

6 rear-panel ¼"/RCA auxiliary outputs.

4. P16 Out: Allows patching of internal signal paths to the 16 outputs of the

console’s 16-channel P16 Ultranet output.

5. Card Out: Allows patching of internal signal paths to the 32 outputs of the

XUF card.

6. AES50-A: Allows patching of internal signal paths to the 48 outputs of the

rear panel AES50-A output.

7. AES50-B: Allows patching of internal signal paths to the 48 outputs of the

rear panel AES50-B output.

None of the routing screen's tabs contains a secondary level of encoder functions.

When routing audio, the Layer up/down keys do not need to be used.

7.4.1 Routing Screen: Home Tab

The routing screen’s home tab allows the user to patch the console’s physical

rear-panel inputs to the 32 input channels and Aux inputs of the console.

As a default, the console maps the console’s 32 rear-panel analog inputs to their

the respective 32 channel inputs that are accessed on input fader layers one

and two, and maps the rear panel line-level (auxiliary) inputs to the third input

faderlayer.

However, the home tab of the routing screen can be used to change this

default assignment and “crosspatch” dierent physical inputs to dierent

channel inputs, in banks of 8 channels at a time. This allows the user to create a

custom layout of channel inputs that diers from the order that the sources are

plugged into the rear panel, and is easier than physically re-patching physical

audiocables.

To assign various inputs to the console’s input channels, perform the

followingsteps:

1. Adjust the rst rotary encoder to select which 8-channel audio input

source feeds input channels 1-8 of the console. As the encoder is rotated,

thecurrently selected input will be highlighted in the vertical list of choices.

2. When the desired 8-channel source is selected, push the 1st encoder to

“connect” the currently selected 8-channel source. The selected source now

feeds input channels 1-8 of the console.

3. Input choices that can be assigned include:

• Local 1-8

• Local 9-16

• Local 17-24

• Local 25-32

• AES50-A 1-8

• AES50-A 9-16

• AES50-A 17-24

• AES50-A 25-32

• AES50-A 33-40

• AES50-A 41-48

• AES50-B 1-8

• AES50-B 9-16

• AES50-B 17-24

• AES50-B 25-32

• AES50-B 33-40

• AES50-B 41-48

• Card 1-8

• Card 9-16

• Card 17-24

• Card 25-32

4. To assign an 8-channel source for the other input channels of the console

(9-16, 17-24, 25-32), simply repeat the process above, usingthe other four

rotary encoders on the same screen.

5. Choices for Aux In 1-4 include:

• Aux 1-4

• Local 1-4

• AES50-A 1-4

• AES50-B 1-4

• Card 1-4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 in the language / languages: English as an attachment in your email.

The manual is 11,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32

Behringer X32 Quick start guide - English, German, French, Portuguese, Spanish - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Behringer X32 Manual

Product: