660492
5
Zoom out
Zoom in
Previous page
1/29
Next page
5 X32 CORE DIGITAL RACK MIXER User Manual
1. Callouts
(1) (3) (4) (5) (6) (7) (8) (9) (10) (11)
(2)
(12) (13) (15) (16) (17)(14) (18)
(1) SCENE/SETUP button toggles between Scenes Recall (green LED) and
Channel Selector mode (LED o) with a short press. Hold the button to
enter Setup Mode (green LED) and press the button again to exit Setup
Mode. The LED turns red to indicate access on attached DATA/AUDIO
USB media.
(2) DATA/AUDIO input allows connection of USB ashdrives for rmware
updates, loading/saving scenes and show les, and playing back or
recording WAV les.
(3) METER displays the input level of the selected channel.
(4) DISPLAY shows the channel name and icon, scene name, or setup
pageinformation.
(5) CHANNEL TYPE LEDs indicate which type of channel is currently selected.
(6) SELECT knob navigates the display menus and edits setup parameters.
Seethe SELECT Knob Functions section for details.
(7) TALKBACK button engages the external Talkback mic input on the
rear panel. Details of the routing and operation can be dened on the
monitoring preferences page of the control software.
(8) USER ASSIGNABLE ENCODERS adjusts a predened variable parameter in
the software. Function to be dened in the control software.
(9) USER ASSIGNABLE BUTTONS toggles a predened on/o parameter in
the software. Function to be dened in the control software.
(10) PHONES output and level allow audio to be monitored directly from
the unit. Details of the audio content can be adjusted in the monitoring
preferences page of the control software. While in Channel Select Mode,
push the Select encoder to toggle Solo on and o.
(11) POWER button turns the unit on and o.
(12) X-USB interface card allows up to 32 channels of bidirectional audio to be
transmitted to and from a computer.
(13) ETHERNET connector allows full OSC-based remote control of the X32 CORE.
(14) MIDI IN/OUT allows the unit to send and receive MIDI commands via
standard 5-pin DIN cables.
(15) ULTRANET connector sends 16 channels of audio to a P16
monitoringsystem.
(16) AES50 A and B connectors allow 96 channels of bidirectional audio for
connection to S16 digital snakes or other X32 family products. The front
panel LEDs will light green to indicate proper sync, light red to indicate
a sync error, and remain unlit when no connection is present. Shielded
CAT-5e cable should always be used for AES50 connections between X32
and S16 units.
(17) MONITORING OUTPUT jacks allow connection of monitor speakers via
balanced or unbalanced ¼" cables.
(18) TALKBACK input accepts a dynamic microphone via ¼" TRS jack. Adjust the
gain with the adjacent TRIM knob.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X32 CORE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 CORE in the language / languages: English as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 CORE

Behringer X32 CORE Quick start guide - English, German, French, Portuguese, Spanish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info