660561
4
Zoom out
Zoom in
Previous page
1/13
Next page
4 VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual
1. Introduction
The demands placed on a guitar amp are nowadays very broad. A guitarist should
oer a wide array of sounds. That’s why it is very important to us to be able to
oer you maximum sound diversity as well as a variety of connection possibilities
with your VIRTUBE. Don’t worry: you will quickly master the VIRTUBE and learn
how to use all of its capabilities easily and intuitively. With its up-to-date
circuitry, the VIRTUBE features the functionality and reliability of a truly modern
guitar amp.
VTC Virtual Tube Circuitry
The specially developed VTC Virtual Tube Circuitry gives your sound the unique
vintage avor of classic tube amps.
1.1 Before you get started
Your product was carefully packed at the factory to ensure safe transport.
Nevertheless, if the box is damaged inspect the unit immediately for signs
of damage.
If the unit is damaged please do NOT return it to us, but notify your
dealer and the shipping company immediately; otherwise, claims for
damage or replacement may not be granted.
Otherwise, always use the original box to prevent damage during
storage or transport.
Make sure that children cannot play unsupervised with the unit or
its packaging.
Please ensure proper disposal of all packing materials.
Recylce whenever possible.
Ensure adequate air supply and to avoid overheating do not place the unit
near radiators etc.
Please make sure that all devices are properly grounded/earthed.
For your own safety, never remove or disable the ground/earth
conductors from the devices or on the power cords. The unit
must always be connected to the mains outlet with a protective
grounding connection.
1.1.1 Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Shouldyour
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.
Thank you for your cooperation!.
2. Control Elements
(2) (17)
(1) (3)
(4) (5) (6) (7) (8) (10) (11) (12) (13) (14) (15) (16) (20) (21) (22) (23 ) (24) (25) (26)
(18) (19)
(9)
Fig. 2.1: VIRTUBE control elements (front panel)
2.1 Front panel
(1) The INPUT socket is the ¼" connector for your guitar. Please use a standard
¼" TS connector.
2.1.1 CLEAN CHANNEL
(2) The CLEAN CHANNEL LED lights up when the CLEAN channel is active.
(3) The GAIN control determines the volume of the CLEAN channel.
(4) The CRUNCH button (VT100FXH and VT100FX only) allows you to add some
slight distortion to your clean sound, giving it a bit of “dirt” or “crunch”.
(5) The BASS control in the EQ section allows you to raise or lower the bass
frequencies on the CLEAN channel.
(6) With the MIDDLE control you can raise or lower the midrange frequencies
onthe CLEAN channel.
(7) The TREBLE control adjusts the treble frequencies on the CLEAN channel.
(8) Press the CHANNEL button to switch between the CLEAN and OVERDRIVE
channels. The channel LED lights up when the channel is activated. With all
models you can also switch between channels using the footswitch provided.
2.1.2 OVERDRIVE CHANNEL
(9) The OVERDRIVE CHANNEL LED lights up when the channel is active.
(10) The GAIN control determines the amount of gain applied and hence the
degree ofdistortion in the OVERDRIVE channel.
(11) The OD1/OD2 button (VT100FXH and VT100FX only) switches between
twodierent overdrive sounds.
(12) The BASS control in the EQ section allows you to raise or lower the bass
frequencies on the OVERDRIVE channel.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer VT250FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer VT250FX in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer VT250FX

Behringer VT250FX User Manual - German - 13 pages

Behringer VT250FX User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info