660595
6
Zoom out
Zoom in
Previous page
1/9
Next page
6 PRO MIXER VMX100USB User Manual
3. Rear Panel
With the exception of MIC INPUT and HEADPHONES, all of the VMX100USB’s audio
connections are located on the rear panel and supplied as RCA connectors.
(22)
(23)
(26)
(24) (20) (21) (28)
(25)(27)
(29)
Fig 3.1: Rear view of the PRO MIXER VMX100USB
(20) The PHONO inputs for channel 1 and 2 are only for turntable connection.
(21) The LINE inputs may be used for connecting tape decks, CD or
MD players etc.
(22) The GND connection allows grounding of a turntable.
(23) Use the AMP output to connect the VMX100USB to an amplier. The level is
controlled by the MAIN knob in the MIC/MAIN section.
In order to avoid power-up thumps, which can damage your
loudspeakers, please power up your amplifier last. There should be no
signal present, e.g. no music playing, when you turn on your amp. In
addition, we suggest that you set all volume-related controls to “zero”
(down) before powering up your system. Following these precautions
will save you from unpleasant and potentially dangerous surprises.
(24) The TAPE output enables you to record your performance by connecting a
tape deck, DAT recorder etc. Unlike the AMP output, the TAPE level is xed,
so that you have to adjust the input level on the recorder.
(25) The POWER ON switch turns on the PRO MIXER.
(26) FUSE HOLDER/VOLTAGE SELECTOR. Before you connect the equipment to
an AC outlet, please be sure that the voltage displayed corresponds with your
local AC voltage. If you should need to replace the fuse, be sure to replace
it with one of the same type and value. Some units allow you to switch
between 240 V and 120 V by rotating the fuse holder.
To operate the unit at 120 V, you must install a fuse with the double
ampere rating.
(27) This is the socket for the power cable. The impulse behavior of any given
amplier circuit depends largely upon the power supply’s inherent reserves.
All mixers contain numerous operational ampliers (op-amps) for processing
line-level signals. Due to the restricted performance of their power supplies,
many mixers show “stress symptoms” when used under extreme conditions,
resulting in inferior audio quality. Thanks to its generously proportioned
power supply, this will never happen to your VMX100USB: The sound will
always be clear, transparent and powerful.
(28) SERIAL NUMBER. Please take the time to ll out and return the warranty
card within 14 days after the date of purchase. This will entitle you to all the
benets of our extended warranty. Alternatively, you can register online at
behringer.com.
(29) The VMX has built-in USB connectivity, allowing stereo signals to be sent
to and from the mixer and a computer. The audio sent from the mixer
to a computer is identical to the TAPE OUT signal, which is the pre-fader
MAIN signal. Audio being sent from a computer to the VMX can be selected
with the Channel 1 PHONO/LINE-USB switch.
Connect a USB type B plug into the USB jack on the mixer, and the other end
into a free USB port on your computer. There are no required drivers, but we
recommend that PC users install the included ASIO driver. The driver can also be
downloaded from behringer.com.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer VMX100USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer VMX100USB in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer VMX100USB

Behringer VMX100USB Quick start guide - English, German, French, Portuguese, Spanish - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info