660483
7
Zoom out
Zoom in
Previous page
1/11
Next page
12 13REFERENCE AMPLIFIER A500 Quick Start Guide
REFERENCE AMPLIFIER A500 Controls
(2) (3) (4) (5)
(1)
(9) (10)
(13)(8)
(11) (12) (6)(7)
(EN) Controls
(1) The POWER switch is used to power up the
A500. The POWER switch should always be
in its “O” position when you connect the
unit to the mains.
POWER LED lights up as soon as you power
up the A500.
(2) Each channel features a volume control.
Useit to adjust gain on your A500. Both
volume controls should be turned all the
way to the left whenever you power the unit
up or down. If an active signal is present on
the input, turningthe volume down will
protect your speakers and your ears from
unwanted “pops” or transients.
(3) The PROT LED lights up whenever the
protective circuitry mutes the speaker
output. Please turn your A500 o
immediately whenever this LED is lit.
(4) The high-precision power indicator gives out
current signal strength.
(5) The CLIP LED lights up when the signal
is distorted. Should distortion occur,
reducethe input level, so that the CLIP LED
no longer lights up.
(6) CHANNEL INPUT 1 (MONO). Connectthe
signal source whose output needs to
beamplied.
(7) CHANNEL INPUT 2. These are the inputs for
channel 2.
(8) The STEREO/BRIDGED MONO switch is used
to toggle between the two operating modes
of your A500.
Please power the A500 down
using the POWER switch each time
you change the operating mode.
Similarly,onlyconnect/disconnect
speaker connectors if the A500 has rst
been powered o!
(9) OUTPUT 1, OUTPUT 2 and BRIDGED
MONO: These are the speaker connectors
of your A500 laid out as ¼" TS mono
connectors. When in mono-bridged mode,
only use the BRIDGED MONO output.
(10) In addition to XLR or ¼" TRS connectors,
youcan also use binding posts for
connecting speaker cables. When in mono-
bridged mode, make sure to connect your
cables to both middle connectors–as shown
on the unititself.
(11) FUSE SWITCH/VOLTAGE SELECTION.
(12) The mains connection is made via a standard
IEC RECEPTACLE. A matching cable
isenclosed.
(13) SERIAL NUMBER.
For more details on the full functionality
of this product, see the product page
on behringer.com and download the
full manual.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer A500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer A500 in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer A500

Behringer A500 User Manual - English - 11 pages

Behringer A500 User Manual - German - 11 pages

Behringer A500 User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info