585210
2
Zoom out
Zoom in
Previous page
1/4
Next page
UNLOCK:
(1) In the disarming state, use the key to turn on ACC, press and turn up engine,
Only you hear the lock warning tone you can start the engine when you a reminder. If
you use the key to start the engine you must press .
(2) Turn off ACC, press or , the engine will be locked again.
(3) When ACC is turned off, the button can be used for turning light: short press the light is
on, short press again the light is off. Turning lights will be off automatically after 5 seconds.
This function can be used for lighting at night or search motorcycle.
START ENGINE REMOTELY
(1) In the disarming state, press twice, strat engine remotely. If fail please repeat the
above operation .
(2) In the start engine remotely state, if make the engine flameout, you must press
(3) In the start engine remotely state, if being robbed in driving , press in available
distance, the engine will lock and immobilize, the system also alarm
DISPLAY REMOTE CONTROL’S BATTERY POWER:
Long press 2s at least and release, the yellow LED will flash, 5 flashes indicates the power
is full, 1 flash indicates the power nearly run out , please replace new battery at once.
Note:
Short press--- time of pressing is shorter than 1 second( button of the remote sounds “du”)
Long press--- time of pressing is longer than 2 seconds( button of the remote sounds “du,du”)
USER PERSONALIZED SETTINGS
(The following function will be effective only when ACC is turned on.)
ACTIVATE “CHANGE INTO BUZZER” FUNCTION:
Keep pressing and press 3 times then release both buttons, turning lights will flash 3
times, which indicates the function is activated.
INACTIVATE “CHANGE INTO BUZZER” FUNCTION:
Keep pressing and press 4 times then release both buttons, turning lights will flash 4
times, which indicates the function is inactivated.
ACTIVATE “LOCK AUTOMATICALLY IN 3 MINUTES AFTER YOU STOP THE
ENGINE” FUNCTION
Keep pressing and press 5 times then release both buttons, turning lights will flash 5
times, which indicates the function is activated.
INACTIVATE “LOCK AUTOMATICALLY IN 3 MINUTES AFTER YOU STOP THE
ENGINE” FUNCTION
Keep pressing and press 6 times then release both buttons, turning lights will flash 6
times, which indicates the function is inactivated.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beeper X6R - Scooter alarm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beeper X6R - Scooter alarm in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beeper X6R - Scooter alarm

Beeper X6R - Scooter alarm User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info