449622
18
Zoom out
Zoom in
Previous page
1/20
Next page
39
The water is not pumped
out of the washing
machine.
An acoustic signal sounds and
the notice “FP
” appears in the
display.
Switch off the washing machine
and pull out the mains plug.
Check whether:
The drain hose is kinked (see
“Installation/Connect the
water drain hose”);
The pump or the filter is
blocked (see “Removing the
Filter”).
IMPORTANT:
Before emptying
ensure that the water has
cooled down.
The water in the drain hose is
frozen.
Reconnect the appliance to the
electrical socket.
Switch the washing machine on
again, select a programme and
start the appliance. To rinse the
laundry, we recommend a short
programme without the
addition of detergent.
If the fault occurs again, please
contact After Sales Service (see
“After Sales Service”).
There is a fault in an
electrical component.
An acoustic signal sounds and a
notice from “F4
” to “F16
appears in the display.
Press the “Reset” button. The
programme will start again.
If the fault occurs again, please
contact After Sales Service (see
“After Sales Service”).
There is a fault in the
“Water Stop”.
An acoustic signal sounds, the
notice “Overdosing
” or “FA
appears in the display and the
pump operates.
This fault can be triggered by:
1.
Excess foaming;
2.
A leak in the washing machine.
In this case the pump is switched
on automatically in order to
pump out the water.
Switch the washing machine off,
pull out the mains plug and turn
the water tap off. Tilt the
appliance forwards carefully to
allow the collected water to
drain out of the appliance base.
Then:
1.
Reinsert the mains plug in the
socket.
2.
Turn the water tap on [if water
immediately flows into the
appliance again, without the
appliance being started, there
is a fault. Turn the tap off and
notify After Sales Service, see
“After Sales Service”).
3.
Switch the washing machine
on again, select the desired
programme and start the
appliance.
If the fault occurs again, please
contact After Sales Service (see
“After Sales Service”).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WAK 7575 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WAK 7575 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WAK 7575

Bauknecht WAK 7575 User Manual - German - 20 pages

Bauknecht WAK 7575 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info