305997
13
Zoom out
Zoom in
Previous page
1/14
Next page
Connect the water supply hose
1.
Carefully screw the hose connection onto the tap,
preferably by hand.
2.
Make sure there are no kinks in the hose.
3.
Check water-tightness of tap and appliance connections
by turning the tap completely on.
The appliance
must not be
connected to the mixing tap of
a non-pressurized water heater.
The appliance can be connected without a non-return valve.
Check the supply hose regularly for brittleness and cracks
and replace if necessary using a new hose of the same type
(available from After-Sales Service or specialist dealer).
If the flexible hose is damaged, unplug the appliance from
the mains immediately.
Water supply hose “A”
If the hose is too short, replace it with a suitable length of
pressure resistant hose (minimum 1000 kPa - EN 50084
approved type).
Mount the new hose professionally on the washing
machine and the tap.
Water supply hose “B”
If the hose is too short, replace it with a longer length of
“Water Stop” hose (available from After-Sales Service or
specialist dealer).
Mount the new hose professionally on the washing
machine and the tap.
Note: The inlet hose and the plastic enclosure at the water
connection contain electrical components.
For this reason,
do not cut the hose and do not immerse the plastic
enclosure in water.
Connect the water drain hose
1.
Connect the drain hose to the ventilated siphon or hook it over the edge of a sink with the “U” bend.
2.
Make sure there are no kinks in the hose.
3.
Secure the hose so that it cannot fall down while the appliance is running.
Small wash-hand basins are unsuitable.
If you need to add an extension, use a hose of the same type. Secure the connections with clips.
Max. drain hose length: 2.50 m
Max. drain height: 1.25 m
Min. drain height: 0.70 m
A
B
4gb15150.fm Page 13 Monday, July 8, 2002 7:00 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht wab 8795 big x 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht wab 8795 big x 10 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht wab 8795 big x 10

Bauknecht wab 8795 big x 10 User Manual - German - 14 pages

Bauknecht wab 8795 big x 10 User Manual - Dutch - 14 pages

Bauknecht wab 8795 big x 10 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info