697006
3
Zoom out
Zoom in
Previous page
1/8
Next page
EN
3
4. SWITCH ON WASHING MACHINE
Press the On/O button until the programme button lights
up. An animation appears, and there is a sound. Afterwards
the washing machine is ready to be operated.
5. SET THE DESIRED PROGRAMME
GUIDED MODEthe button light guides you through setting your
programme in the following order: selection of programme /
temperature / spin speed / options. As soon as you conrm a selection
by pressing the knob, the button light will jump to the next step.
Select programme:
Make sure that the programme button lights up. Turn the knob
to select the desired Programme.
Programme name and duration appear on the display.
Conrm the desired programme by pressing the knob. The
maximum possible laundry load for the selected programme is
indicated after a few seconds.
Change temperature, if needed
If you want to change the temperature indicated over the
temperature button, make sure that the Temperature button
lights up.
Turn the knob to select the desired temperature, then press the knob
to conrm.
Change spin speed, if needed
If you want to change the spin speed indicated over the Spin
button, make sure that the Spin button lights up.
Turn the knob to select the desired spin speed, or Rinse hold,
then press the knob to conrm.
Select options, if needed
Make sure that the options button lights up. The options which
are selectable for your programme are indicated by lighting
arrows.
Turn the knob to select the desired options. The symbol of the selected
option blinks. To conrm it, press the knob.
Some options / functions can be selected by directly pressing the
button:
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
INDIVIDUAL MODE
After you have switched on the washing machine, you are not forced to
follow the GUIDED MODE.
It is up to you which order you choose to set your programme. To do a
setting, rst press the relevant button, then turn the knob to select,
and nally press the knob to conrm.
The range of temperatures, spin speeds and options depend on the
programme selected. Therefore it is recommended to start your setting
with selecting the programme.
6. ADD DETERGENT
If you do not use the Dosing Aid function, pull out the
detergent dispenser and add detergent (and additives/
softener) now, as indicated in section DETERGENT
DISPENSER.
Observe the dosing recommendations on the detergent
pack. If you have selected PREWASH or FINISH IN, observe the
recommendations in section OPTIONS, FUNCTIONS AND
INDICATORS. Afterwards carefully close the detergent dispenser.
If you use the “Dosing Aid” function, add detergent later, after you
have started the programme. Refer to section OPTIONS, FUNCTIONS
AND INDICATORS.
After having added detergent /additives, do not open the detergent
dispenser anymore, to avoid overow.
7. START PROGRAMME
Press and hold Start/Pause” until the button lights up
solidly; the programme starts.
If you have selected “Dosing Aid”, the washing machine will
indicate you the recommended detergent amount for your
laundry load after programme start. Follow the instructions as
indicated in section OPTIONS, FUNCTIONS AND INDICATORS /
Dosing Aid.
8. CHANGE A RUNNING PROGRAMME, IF
NEEDED
You can still change the settings while a programme is running. The
changes will be applied, provided the respective programme phase
has not nished yet.
Press the relevant button (for example the “Spin speed” button to
change the spin speed). The value blinks for a few seconds.
While blinking, you can adjust the setting by turning the knob. If the
value stopped blinking, press the button again.
Press the knob to conrm the modication. If you do not conrm, the
modication is conrmed automatically – the modied setting stops
blinking
The programme will continue automatically.
To change the settings of a running programme, you can also
Press “Start/Pause” to put the running programme on pause
Change your settings
Press “Start/Pause” again to continue the programme.
9. PAUSE A RUNNING PROGRAMME AND OPEN
THE DOOR, IF NEEDED
Press and hold Start/Pause” to pause a running programme.
Provided water level is not too high, or laundry is not too
hot, the door indicator lights up. You can open the door, for
example to add/remove laundry.
Close the door again and press “Start/Pause” to proceed
with the programme.
10. RESET A RUNNING PROGRAMME, IF
NEEDED
Press and hold the “On/O” button until the display
indicates that the programme is cancelled.
The water drains, the programme ends and the door
unlocks.
11. SWITCH OFF THE WASHING MACHINE
AFTER PROGRAMME END
The display indicates that the cycle is nished, and the “Door open”
indicator lights up – you can take out your laundry.
Press “On/O” to switch o the washing machine. If you do
not switch it o, the washing machine will switch o
automatically after about a quarter of an hour after
programme end, to save energy.
Leave the door ajar, so that the inside of the washing machine can
dry.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WA ECO 8282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WA ECO 8282 in the language / languages: English as an attachment in your email.

The manual is 7,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WA ECO 8282

Bauknecht WA ECO 8282 User Manual - English - 52 pages

Bauknecht WA ECO 8282 Quick start guide - German - 8 pages

Bauknecht WA ECO 8282 User Manual - German - 52 pages

Bauknecht WA ECO 8282 Quick start guide - Dutch - 8 pages

Bauknecht WA ECO 8282 User Manual - Dutch - 52 pages

Bauknecht WA ECO 8282 Quick start guide - French - 8 pages

Bauknecht WA ECO 8282 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info