572351

Bauknecht WA 9597 Manual

3
Zoom out
Zoom in
Previous page
1/17
Next page
5019 401 05431
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
Turn the programme selector to the desired programme.
The
temperature
and
spin speed
indicated on the
display can be altered by pressing the “Temperature”
button or the “Variable spin” button.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning
to a later time, or if you want to drain only.
• If you select “Rinse hold”, do not leave the laundry to
soak for too long.
Note:
The programme stops to “Rinse hold” at the
time the “Rinse hold” symbol on the display lights up.
The light over the
“Start”
button flashes.
Terminate the “Rinse hold” option:
• Press the
“Start”
button; the programme will
terminate automatically with the final spin cycle for the
present wash programme.
• If you do not wish to spin the clothes, push the
“Reset”
button
and then the
“Start”
button to start
the Drain programme.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water or for washing baby linen, and helps people
with allergies.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Steam Hygiene +” button
• Eliminates bacteria and helps sanitizing the laundry.
• Appropriate for cotton and/or synthetic laundry items with
care label within temperature range of 40 to 60°C.
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
White Cotton / Hygiene + 95 7.0 70
**
2.10 2:10
Coloured Cotton 60 7.0 65 1.33 2:10
Coloured Cotton with “Eco”
***
60 7.0 60 1.19 2:20
Coloured Cotton 40 7.0 65 0.75 2:05
SuperEco 60 7.0 62 0.84 4:00
Synthetics 60 3.5 48
**
0.95 1:35
Synthetics 40 3.5 44 0.55 1:20
Daily load 40 5.0 66 0.60 1:00
Quick wash 30 5.0 60 0.30 0:30
Steam Refresh — 1.0 1 0.20 0:10
Steam Auto Clean — — 11 0.50 0:35
Delicates 30 2.5 60 0.45 0:50
Wool 40 2.0 60 0.65 0:45
Handwash 40 2.0 45 0.65 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions
applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
• Prolongs the programme by approx. half an hour to an
hour, depending on the load size.
• If you select this option, “St” appears on the display during
the steam phase.
“Steam Power” button
• Treats the laundry with hot steam during the wash
cycle in order to help removing stains.
• Selectable for laundry made of cotton and/or
synthetics within temperature range of 40 to 60°C.
• If you select this option, “St” appears on the display
during the steam phase.
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the “Start delay”.
• Select programme, temperature, spin speed and options.
• Press the “Start delay” button to select the delay time
up to 23 hours.
• Press the
“Start”
button.
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
“Start”
button, the number
of hours preselected can be reduced by pressing and
holding the “Start delay” button. From 1 hour on, the
delay time can also be reduced by minutes.
To cancel the “Start delay”
..before you press the “Start” button:
• Select another programme or press the
“Reset”
button.
..after having pressed the “Start” button:
• Press the
“Reset”
button for at least 3 seconds - the
start delay time disappears from the display.
Open the tap and press the
“Start”
button. The blue light
under the
“Start”
button is on. The programme
sequence indicator shows the current programme phase,
running from left to right through Wash, Rinse, Spin/Drain.
Before starting and after end of a programme, the symbol
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
You can lock the buttons of the control panel against
improper use (e.g. by children).
• Press the temperature and the spin speed button
simultaneously and hold them for at least 3 seconds.
The key symbol on the display lights up.
• To unlock the buttons again: proceed in the same way.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
• The symbols of the programme sequence indicator
are dark, and the “Door open” symbol lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the
“Start”
button to pause the programme.
The light flashes.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
“Start”
button again. The new programme
continues at the same position where the previous
programme was interrupted. Do not add detergent
for this programme.
The
“Reset”
button cancels a programme before the end.
• Press the
“Reset”
button for at least 3 seconds;
“rES” appears on the display. Any existing water is
drained out before the door can be opened. Caution!
The washing might still be hot.
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATION
CHILD LOCK
RED INDICATIONS ON THE DISPLAY
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
40105431GB.fm Page 2 Thursday, September 20, 2007 2:56 PM
Black process 45.0° 100.0 LPI
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WA 9597 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WA 9597 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WA 9597

Bauknecht WA 9597 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info