73601
16
Zoom out
Zoom in
Previous page
1/17
Next page
35
AFTER-SALES SERVICE
Before contacting After-Sales Service:
1.
See if you can solve the problem yourself
(see “Troubleshooting guide/after-sales
service”).
2.
Switch the appliance on again to see if the
problem has been solved. If it has not, disconnect
the appliance from the power supply and wait for
about an hour before switching on again.
3.
If the problem persists after this course of action,
contact After-sales Service.
Specify:
the nature of the problem,
the model,
the Service number (the number after the word
SERVICE on the data plate on the inside of the
appliance),
your full address,
your telephone number and area code
Note:
The direction of door opening can be changed.
If this operation is performed by After-sales
Service it is not covered by the warranty.
Remember
Motor running time depends on different things: number of door openings, amount of food stored,
temperature of the room, setting of the temperature controls.
If, after performing the above checks, your appliance still does not work properly, contact the After-sales
Service, explain the problem, specifying the model and appliance service number (stated on the data
plate).
If the refrigerator temperature is too high
Is the appliance installed near a heat source?
Are the refrigerator controls correctly set?
Has a large amount of food been added to the refrigerator or freezer?
Check that the doors are not opened too often.
Check that the doors close properly.
Make sure that air flow vents inside the compartment are not blocked, as this prevents the circulation
of cold air.
If there is moisture build-up
Make sure that the food is properly packaged. Dry any dampness on food containers before placing
them in the refrigerator.
Check that the doors are not opened too often. When the door is opened, humidity from the room air
enters the refrigerator. The more often the door is opened, the faster humidity builds up, especially
when the room itself is very humid.
If the room is very humid, it is normal for moisture to build up inside the refrigerator.
It is normal for droplets of water to form on the rear wall after the automatic defrost cycle.
If the doors do not open and close properly
Check that food packages are not blocking the door.
Check that the door trays, shelves and drawers are all positioned correctly.
Check that the door seals are not dirty or sticky.
Ensure the appliance is level.
Always disconnect the refrigerator from the power supply before replacing any light bulbs.
If the inside light is not working:
Disconnect the appliance from the mains power supply.
Depending on the model
Remove the bulb cover (depending on model)
Unscrew or remove the bulb.
Check the bulb and if necessary replace it.
Some models are equipped with a special bulb, which does not unscrew. Pull towards the inside of the
appliance. This bulb is available only from our After-sales Service. Replace using maximum 15W bulb.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht KDNA 4300 IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht KDNA 4300 IN in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht KDNA 4300 IN

Bauknecht KDNA 4300 IN User Manual - German - 16 pages

Bauknecht KDNA 4300 IN User Manual - Dutch - 16 pages

Bauknecht KDNA 4300 IN User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info