38040
1
Zoom out
Zoom in
Previous page
1/4
Next page
5019 496 90468
GB
GSXP 7527
Quick Reference Guide
Before using the dishwasher, read the user instructions!
BK/I/FD/GB
(We reserve the right to make technical modifications)
Add rinse aid
Add regeneration salt
Only add regeneration salt immediately
before starting a wash programme.
Time and failure display
Indicates in hours the time remaining until the start of
the wash cycle. Toward the end of the programme,
during the drying cycle, the display will indicate the time
remaining in minutes.
“F....” Identification of faults for service technician
“Delayed start” button
The wash cycle can be programmed to start after 1 - 24
hours. With each successive touch of the button, the
delayed start indicator increases by 1 hour, and after 24
returns to 00. Then press the Start button. The
dishwasher will start at the set time.
“Half load - Multizone” button
Load the upper or lower rack only.
This function can be used with any programme.
Press once = upper rack
(the indication lamp/symbol comes on)
Press twice = lower rack
(the indication lamp/symbol comes on)
Press 3 times = Off (half load function deactivated).
When washing without the top rack, press the “Half
Load” button twice, or “Lower rack wash” (the
corresponding LED/symbol comes on).
Set detergent
(when the appliance is used for the first time and when
using a different type of detergent)
Off indicator = detergent (powder, gel, tablets)
Left indicator =2 in 1 detergent
Right indicator = 3 in 1 / 4 in 1 detergent
Antibacterial rinse
4) 5)
This function adds an antibacterial rinse at the end of the
wash cycle, thereby guaranteeing a perfectly clean and
sanitized load. The lamp will light up when the function
is activated. If the temperature is not maintained during
the antibacterial cycle (e.g. if the door is opened and
remains open for a long time), the lamp will start
blinking to indicate that sanitation is not guaranteed.
1) Reference programme for energy label EN 50242;
2) Refer to “User instructions”;
3) Programme data obtained in conformity with European
standard EN 50242. Values may vary in relation to usage,
e.g.: different loads, options, water temperatures - above
or below 15°C - as well as water hardness and power
supply voltage, etc.
4) The bacteria removal efficiency has been tested by the
Institut Pasteur de Lille (France), based on the NF
EN 13697 standard of November 2001.
5) These programmes can be used with the Antibacterial
rinse option.
6) Energy saving programme with prolonged drying cycle.
On button
Off button
Programme selection button
The selected programme is shown in the
window of the display.
Start button
Switches “on” when the dishwasher is
operating. Flashes when a fault occurs.
Switches off at the end of the programme.
Reset button
After pressing the Reset button, the selected
programme and the supplementary functions
are cancelled (except the detergent and water
hardness settings, see user instructions) and
must be reset. On releasing the button this is
confirmed by an acoustic signal.
Indicators
Options
3)
Programme chart
Detergent
2)
Consumption
3)
Programmes Loading instructions A B
Litres kWh Minutes
Pre-Rinse cold
Crockery to be washed later. - - 4.0 0.03 14
Quickwash 40°C
Lightly soiled crockery with no
dried-on food.
X - 10.0 0.65 30
Bio
1) 5) 6)
50°C
Normally soiled crockery. X X 13.0 1.05 195
Standard
5)
60°C
Normally or heavily soiled
crockery.
X X 13.0 1.25 120
Intensive
5)
70°C
Recommended programme for
heavily soiled crockery, especially
suitable for pans and saucepans.
X X 14.0 1.55 155
Important information for Test Laboratories:
For detailed information on the EN comparison test and other tests, contact the following address:
“nk_customer@whirlpool.com”.
1


Need help? Post your question in this forum.

Forumrules
1

Forum

bauknecht-gsxp-7527

Reset search

  • Good day,
    I have a Bauknect GSXP 7527/2 dishwasher which does not drain water. I have cleaned the filter but has not solved the problem. I believe the problem is further the down the line. I do not to know how I can get to the propeller to remove any debris. Is there a drawing/instruction how to access the propeller ?
    Regards,
    Mort Submitted on 4-1-2022 at 13:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht GSXP 7527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht GSXP 7527 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht GSXP 7527

Bauknecht GSXP 7527 User Manual - English - 9 pages

Bauknecht GSXP 7527 User Manual - German - 9 pages

Bauknecht GSXP 7527 Quick start guide - Dutch - 4 pages

Bauknecht GSXP 7527 User Manual - Dutch - 8 pages

Bauknecht GSXP 7527 Quick start guide - French - 4 pages

Bauknecht GSXP 7527 User Manual - French - 8 pages

Bauknecht GSXP 7527 User Manual - Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info