starten: het controlelampje gaat branden en gaat na
afloop van het programma uit.
Als de deur tijdens een afwascyclus geopend wordt,
wordt de cyclus tijdelijk onderbroken: het
controlelampje Start knippert. Om de cyclus weer te
starten sluit u de deur en drukt u nogmaals op de
Start-toets.
TOETS ANNULEREN/UIT
Druk op deze toets om het bedieningspaneel uit te schakelen.
Als de toets wordt ingedrukt terwijl er een programma loopt,
dan wordt het lopende programma geannuleerd en wordt het
water gedurende 1 minuut afgevoerd (op het display wordt
0:01 weergegeven).
Als hij wordt ingedrukt terwijl de afwasmachine uitgeschakeld
is, worden alle mogelijke vloeistoffen afgevoerd uit de
afwasmachine (dit proces duurt 1 minuut).
(zie rechts voor een beschrijving van de extra functies)
1)Programmagegevens zijn verkregen in overeenstemming met de Europese norm EN 50242 onder normale omstandigheden (zonder extra functies) en kunnen variëren naargelang de
omstandigheden. Bij programma’s met sensor zijn, als gevolg van de automatische kalibratie van het systeem, verschillen mogelijk van maximaal 20 minuten.
2)Referentieprogramma voor het energielabel in overeenstemming met de richtlijn EN 50242. - Opmerking voor testinstanties: neem voor meer informatie over de vergelijkende EN/Standard-test
en andere tests contact op met: “nk_customer@whirlpool.com”.
3)De antibacteriële werking is getest door het instituut Pasteur uit Lille (Frankrijk), in overeenstemming met de norm NF EN 13697 van november 2001.
WATERRECYCLINGSYSTEEM: deze programma’s besparen water in een speciaal daarvoor bestemd reservoir.
EEN TANKREINIGINGSCYCLUS (minstens 45 min.) wordt automatisch elke 30 cycli uitgevoerd, of elke keer als de machine uitgeschakeld wordt, om de beste omstandigheden voor het apparaat
d
Programmatabel
Afwas-
middel
Verbruik
Droog-
fase
Programma’s
Beschikbare
extra functies
Laadinstructies
LiterkWh
Minuten
1)
P1
Sensor40-70 °C
Uitstel
Multizone
Antibacteriële
spoelgang
Aanbevolen programma voor dagelijks
gebruik, met droge voedselresten
(bijv. EN 50242).
X7-141,00-1,6580-165Vol
P2
Glass
40 °C
Uitstel
Multizone
Licht vervuild servies, bijvoorbeeld glazen
en kopjes.
X10,00,85100Verlichting
P3
Express45 °C
Uitstel
Multizone
Licht vervuild serviesgoed, zonder
opgedroogde etensresten.
X11,00,8030NEE
P4
Eco
2)
50 °C
Uitstel
Multizone
Antibacteriële
spoelgang
Normaal vervuild serviesgoed.
Energiezuinig programma.
X6,01,03185Vol
P5
Normal60°C
Uitstel
Multizone
Antibacteriële
spoelgang
Normaal vervuild serviesgoed.X10,01,3080Vol
P6
Night 39 dBA50 °C
Uitstel
Multizone
Normaal vervuild serviesgoed;
voorzichtig en stil programma dankzij de
lagere sproeidruk (39 dbA).
X10,01,20290Verlichting
5019 496 01789
LEES DEZE BEKNOPTE HANDLEIDING EN DE MONTAGE-INSTRUCTIES ZORGVULDIG
DOOR VOORDAT U HET APPARAAT VOOR DE EERSTE KEER GEBRUIKT!
Beschrijving van de extra functies en het display
ZOUTCONTROLELAMPJE
Wanneer dit brandt (aan het
einde van de cyclus), moet het
zoutreservoir worden bijgevuld.
CONTROLELAMPJE
GLANSSPOELMIDDEL
Wanneer dit brandt (aan het einde
van de cyclus), moet het glansspoel-
middelreservoir worden bijgevuld.
DISPLAY TIJDSDUUR AFWAS
Geeft de tijdsduur van de cyclus aan en de resterende tijd (h:min). Geeft bij “Uitgestelde start” de resterende tijd
tot de start van het programma (h.00) aan - minder dan 1 uur (0:min).
Als “Fx Ey”-berichten op het display verschijnen, zie dan pagina 6 - hoofdstuk “Wat moet u doen als...”.
HET BEDIENINGSPANEEL VAN DEZE AFWASMACHINE WORDT GEACTIVEERD DOOR HET
INDRUKKEN VAN EEN WILLEKEURIGE TOETS, BEHALVE DE TOETS ANNULEREN/UIT.
OM ENERGIE TE BESPAREN WORDT HET BEDIENINGSPANEEL NA 30 SECONDEN
AUTOMATISCH UITGESCHAKELD ALS ER GEEN AFWASPROGRAMMA IS GESTART.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht GSIP 61302 GT A at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht GSIP 61302 GT A in the language / languages: Dutch as an attachment in your email.
The manual is 3,27 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.