44092
7
Zoom out
Zoom in
Previous page
1/10
Next page
18
Refer to the separate installation instructions
booklet.
Water inlet and drain:
Strictly follow local Water Board regulations.
Make sure the inlet and drain hoses are kink-
free and are not crushed.
If the hose length does not suffice, replace
with similar hoses obtained from your local
dealer or our After-Sales Service.
The inlet hose must be securely clamped to
the water tap to prevent leaks.
The inlet water temperature varies according
to the model installed: inlet hose marked
25°C max.: maximum temperature 25°C.
All other models: maximum temperature
60°C.
When installing the appliance, make sure the
drain water discharges correctly and, if
necessary, remove the wire gauze from the
sink siphon.
Secure the drain hose with a clamp to the
siphon to prevent it from dropping off during
operation.
For appliances with water-stop system only:
if the water connections are made correctly,
the water-stop system safeguards your home
against damage caused by flooding.
Electrical connections:
Closely adhere to local Electricity Board
regulations.
Voltage information is shown on the rating
plate mounted inside the door on the right
hand side.
The appliance must be earthed as prescribed
by law.
Do not use extension leads or multiple
adapters etc.
Before carrying out maintenance, disconnect
the mains plug.
Do not use the dishwasher if it has been
damaged in transit. Consult your local retailer
or our After-Sales Service.
The power cable must only be replaced by a
qualified technician.
CONNECTIONS
94000-gb.fm5 Page 18 Thursday, September 13, 2001 4:13 PM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht GSF4872 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht GSF4872 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht GSF4872

Bauknecht GSF4872 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info