46210
2
Zoom out
Zoom in
Previous page
1/4
Next page
1. After loading the dishwasher, close the
door properly and open the water
supply tap.
2. Press the On/Off button to switch the
dishwasher on.
One of the programme
indicator lamps will switch on.
3. Select the desired programme by
pressing the corresponding button.
The corresponding indicator lamp
lights up.
If required, select options
(if supplied).
4. Press the Start button to start the
selected programme.
The Start
indicator lamp will light up.
Once set,
the programmed data cannot be
altered by pressing the programme
selector buttons.
Note:
once the Start button has been
pressed, the dishwasher memorises the
last programme selected. This
information remains in the memory even
during interruption of the power supply.
To change the selected
programme, press the Start button
for about 5 seconds,
until the
Start indicator lamp switches
off.
Select a new programme
using the programme selector
knob and press the Start button.
Note:
if the dishwasher is switched off
during a wash programme, when
switched on again it will resume the
wash cycle from where it was
interrupted.
Only open the dishwasher door if
strictly necessary during a wash
cycle and exercise maximum
caution. Danger of scalding from
steam.
5. To indicate the end of the programme,
the Start indicator lamp switches off
and
the End indicator lamp (if fitted)
lights up
(for about 30 min.)
.
6. Once the Start indicator lamp has
switched off press the On/Off button to
switch the dishwasher off.
All the
indicator lamps switch off.
7. Open the door (warning: beware of hot
steam). Unload the lower rack before
the upper one. Close the water tap.
Upper rack
Rack height adjustment:
(The dishwasher is delivered with the upper
rack in the top position).
The rack height can also be changed
when loaded.
To lower: pull out the
two
side
handles and gently lower the rack.
To raise: pull up the
two
side handles
until the rack clicks into place.
The rack must be level on both
sides.
Crockery holders:
Down: cups and long-stemmed
glasses.
Up: plates.
Vario Organizer multi-purpose
support:
To be used, for example, for long-
handled utensils
(arrange knives
with the blade facing downwards),
cups and glasses.
May be used in three different
positions (see also Dishwasher
loading instructions on Page 4).
1. Upon the left-hand side of the rack.
2. Upside-down, towards the centre of
the rack.
3. Upside-down, towards the left side.
Glass holder:
Lower rack
Plate holders:
May be lowered to increase
available space (
A
).
May be removed to increase
available space (
B
). To remove:
pull the handle up.
Cutlery basket:
The cutlery basket can be removed to
increase (
C
) available space.
B
A
C
B
A
C
How to use the dishwasher
Please read the user instructions carefully.
Upper and lower rack
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht GSF 7394 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht GSF 7394 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht GSF 7394

Bauknecht GSF 7394 Quick start guide - English - 4 pages

Bauknecht GSF 7394 Quick start guide - German - 4 pages

Bauknecht GSF 7394 User Manual - German - 8 pages

Bauknecht GSF 7394 Quick start guide - Dutch - 4 pages

Bauknecht GSF 7394 User Manual - Dutch - 4 pages

Bauknecht GSF 7394 Quick start guide - French - 4 pages

Bauknecht GSF 7394 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info