72606
5
Zoom out
Zoom in
Previous page
1/10
Next page
16
HOW TO FILL THE SALT CONTAINER
From a water hardness category of 1–2 (medium), before using the dishwasher, fill the salt container with
regeneration salt (to find out the hardness level of water in your area, contact your local Water Board or check
the last bill you received).
The dishwasher is equipped with an electronic control system that allows you to adjust the water softening system
to suit the local water hardness level.
Adjust the water softening system as follows:
If the water hardness level does not correspond to position h3 on the selector (setting on delivery) or if the water
hardness level changes:
Press the PROGRAMME DELAY button for a few seconds until the 3 DIGIT DISPLAY shows the set value
followed by a dot (3.).
Once the display shows the desired value, release the button; after 5 seconds the setting automatically returns
to programme delay and water hardness level is set to the selected value.
To exit the programming mode press the SET PAUSE button or simply wait approx. 2 seconds without
pressing any button.
Programming must be carried out with the door open; it cannot be carried out with the selector set to the “soak”
cycle.
NOTE:
the display shows water hardness setting and the programme delay. A dot (.) after the number indicates
that the number on the display refers to water hardness level. If no dot (.) is visible, the number on the display
refers to the programme delay.
Hardness
level
German
degrees
°dH
French
degrees
°fH
mmol/l Clarke scale or
English degrees
°eH
Setting
1 soft 0 - 4 0 - 7 0 - 0.7 0 - 5.0 0.
1 - 2 medium 5 - 15 8 - 25 0.9 - 2.7 6.3 - 22.9 1.
2 average 16 - 23 26 - 40 3.8 - 4.2 23.8 - 32.3 2.
3 medium-hard 24 - 31 41 - 60 4.3 - 6.3 33 - 43.8 3.
4 hard 32 - 47 61 - 80 6.5 - 7.4 45 - 51.3 4.
5 extremely hard 48 - 58 81 - 100 8.7 - 10.6 52 - 64 5.
How to fill the salt container
Warning: only use regeneration salts for use domestic dishwashers!
Do not fill the salt container with unsuitable substances, such as detergent,
as this will cause irreparable damage to the water softener system.
1.
Remove the lower rack.
2.
Unscrew the cap by turning it counter-clockwise.
3.
When first using the dishwasher: fill the salt container to the rim
with water.
4.
Fill the salt container with regeneration salt to the rim (using the
funnel provided) (when filling for the first time min. 1.5 kg and
max. 1,7 kg) and stir with a spoon handle.
5.
Screw the cap back on by turning it clockwise.
6.
Fit the lower rack.
7.
If regeneration salt is to be added,
immediately
start a wash
programme (rinsing alone is not sufficient) in order to eliminate
any residual saline solution straight away and avoid corrosion.
Salt level indicator
The dishwasher is equipped with an electric or visual salt level
indicator (depending on the model installed).
Electric indicator
The salt level indicator lamp on the control panel lights up when the
salt container is empty.
Visual indicator
The float is clearly visible in the cap window when the salt container is
full (see photo).
The float lowers and is no longer visible when the salt container is empty.
49694610GB.fm Page 16 Wednesday, November 3, 2004 12:14 PM
Black process 45.0° 150.0 LPI
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht GMX 5997 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht GMX 5997 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht GMX 5997

Bauknecht GMX 5997 User Manual - German - 9 pages

Bauknecht GMX 5997 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info