703661
5
Zoom out
Zoom in
Previous page
1/20
Next page
5
2. FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy. Please follow
the instructions contained in the Quick Start Guide to
activate/deactivate the function. Two seconds after
activation of the Smart Display, the display goes off.
To adjust the temperature or use other functions, it is
necessary to activate the display by pressing any button.
After about 15 seconds without performing any action,
the display goes off again. When function is deactivated
the normal display is restored. The Smart Display is
automatically disabled after a power failure. Remember
that this function does not disconnect the appliance from
the power supply, but only reduce the energy consumed
by external display.
Note: The declared appliance energy consumption refers
to operation with the Smart Display function activated.
This function is available only on the model with User
Interface on the door.
2.2. 6TH SENSE FREEZE CONTROL
/
PROFREEZE FREEZE CONTROL
The 6th Sense Freeze Control / ProFreeze Freeze Control
function works to maintain the right temperature in the
following cases:
- Door opened for a while
The function activates when door opening causes the
internal temperature to increase to values that do not
ensure safe storage of food and remains active until
optimal storage conditions have been restored.
- Fresh food stored in the freezer
The function activates when fresh food is placed in
the freezer and remains active until optimal freezing
conditions are reached so as to ensure the best freezing
quality with the lowest power consumption.
Note: Besides the quantity of food loaded into the
freezer, ambient temperature and the quantity of food
already inside the freezer affect the duration of the 6th
Sense Freeze Control / ProFreeze Freeze Control function.
Therefore significant duration variations are quite normal.
2.3. ON/STAND BY
This function turns On/Stand-by the freezer
compartments. To put the product in Stand-by, press &
hold the On/Stand-by button
for 3 seconds. When
the appliance is in Stand-by, the light inside the freezer
compartment does not work. Remember that this
operation does not disconnect the appliance from the
power supply. To switch the appliance On again, simply
press the On/Stand-By button
.
2.4. BLACK OUT ALARM
After a power blackout, your product is designed to
automatically monitor the temperature in the freezer
when electricity is resupplied. If the temperature in the
freezer rises above freezing level, the Black Out indicator
turns on, the Alarm indicator
blinks and the
acoustical alarm sounds when electricity is resupplied.
To reset the alarm press the Stop Alarm button
just
once.
In case of Black Out Alarm, the following actions are
recommended:
If the food in the freezer is unfrozen but still cold, all
the food in the freezer should be eaten within the next
24 hours.
If the food in the freezer is frozen, this indicates the
food was thawed and then refrozen when electricity
was re-supplied which degrades taste, quality
and nutritional value and also could be unsafe. It
is recommended to not consume the food but to
dispose of the entire content of the freezer. The Black
Out Alarm is designed to provide guidance on food
quality in the freezer in the event of electricity black
out. This system does not guarantee food quality
or safety and consumers are advised to use their
own judgment in evaluating food quality in freezer
compartment.
2.5. TEMPERATURE ALARM
The acoustic alarm sounds and temperature indicator (°C)
blinks. The alarm is activated when:
The appliance is connected to the power supply after
prolonged disuse
The freezer compartment temperature is too high
The quantity of fresh foods loaded into the freezer
exceeds that indicated on the rating plate
The freezer door has been left open for a long time.
To mute the alarm buzzer press Stop Alarm button
just
once. The Alarm indicator
is automatically turned-off as
soon as the freezer compartment reaches a temperature
below -10°C and the temperature set indicator (°C) stop
blinking and shows the chosen setting.
2.6. DOOR OPEN ALARM
The Alarm icon
lights up blinking and the acoustic
alarm sounds. The alarm is activated when the door is
left open for more than 2 minutes. To disengage the door
alarm close the door, or press once Stop Alarm button
to mute the acoustic alarm.
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht GKN19G4S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht GKN19G4S in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht GKN19G4S

Bauknecht GKN19G4S User Manual - German - 2 pages

Bauknecht GKN19G4S User Manual - Dutch - 20 pages

Bauknecht GKN19G4S User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info